2026-09-21 · KeXinMaterials 編集チーム
防水ケース IP67 vs IP68 詳細:B2B マリン / アウトドア / 水中バイヤーガイド (2026)
IP67 と IP68 は交換可能ではありません。IP67 は B2B 防水ニーズの 90% をカバー。IP68 は水中または持続圧力専用。これが 2026 詳細 B2B バイヤーガイドです。
なぜ防水ケースは特別な B2B カテゴリなのか
Waterproof cases serve marine, offshore, subsea, and outdoor industrial applications where case failure means equipment loss + operational delay.
Marine deck operations: spray, splash, brief rain exposure. IP65 typically sufficient.
Offshore oil and gas: saltwater spray, weather deck, helicopter cargo. IP67 minimum.
Subsea ROV and diving: continuous water pressure, depth rating. IP68 required.
For B2B buyers, the cost differential between IP65, IP67, and IP68 (typically 5-10% per tier) does not reflect the operational risk differential. Selecting the wrong IP rating risks equipment loss + safety hazard.
IP65、IP67、IP68:それぞれの意味
IP ratings are defined by IEC 60529. Each digit has specific meaning. B2B buyers should select by deployment, not by maximum spec.
IP65: dust-tight + low-pressure water jets (12.5mm nozzle, 30 kPa). Sufficient for outdoor / weather deck / construction / workshop.
IP67: dust-tight + temporary immersion in 1 metre of water for 30 minutes. Required for offshore deck, marine deck survey, helicopter cargo.
IP68: dust-tight + continuous immersion at 1-3 metres depth for 30+ minutes. Depth specified by manufacturer. Required for subsea ROV, marine research, diving equipment.
IP rating cost differential: IP65 baseline. IP67 +5-10%. IP68 +25-40% (additional sealing, pressure testing, valve).
O リング材質と設計
The O-ring is what seals the case. Material choice depends on deployment.
Silicone O-ring: temperature range -60°C to +200°C. Excellent UV and ozone resistance. Standard for MIL-PRF-GRF tactical cases. Slightly higher cost.
Nitrile (NBR) O-ring: temperature range -40°C to +120°C. Good oil and chemical resistance. Standard for commercial IP67 cases. Cost-effective.
EPDM O-ring: temperature range -50°C to +150°C. Excellent weather and chemical resistance. Used for outdoor / marine applications.
Viton (FKM) O-ring: temperature range -20°C to +200°C. Excellent chemical and high-temperature resistance. Premium for harsh chemical environments.
O-ring compression: 20-30% compression for proper seal. Over-compression damages O-ring. Under-compression allows water ingress.
O-ring groove design: rectangular cross-section, machined or moulded into case. Groove width 1.2-1.5x O-ring cross-section.
圧力平衡弁
Pressure-equalisation valve is critical for altitude-change operations. It allows air pressure to equalise between case interior and atmosphere.
Applications: helicopter cargo, mountain operations, aircraft cargo holds, ROV launch / recovery.
Without pressure valve: case may pop open on descent (high to low altitude) or become impossible to open on ascent (low to high altitude).
Automatic valve: Gore-Tex membrane allows air to flow slowly without water ingress. Standard on our IP67 cases.
Manual valve: twist-to-open allows user to equalise pressure before opening. Used for subsea ROV launch where moisture control is critical.
For B2B buyers operating across multiple altitudes (helicopter + ground + shipboard), pressure-equalisation valve is non-optional.
防水ケースの材料選択
PP copolymer is the workhorse for IP67 / IP68 cases. Glass-filled PP for premium stiffness. PA blends for extreme temperature.
PP copolymer: standard for IP65, IP67, IP68 cases. Good impact resistance, low cost. Wall thickness 3-5mm.
Glass-filled PP (10-30% glass): premium stiffness for IP68 cases. Required for MIL-PRF-GRF load test. Wall thickness 4-6mm.
PA (Nylon) blends: extreme temperature range (-40°C to +80°C). Used for subsea and aerospace applications. Cost USD 4-6/kg.
At KeXinMaterials we run PP copolymer standard for IP65/IP67, glass-filled PP for IP68 + MIL-PRF-GRF cases, PA blends on request for subsea SKUs.
アプリケーション別設計
Waterproof case design varies by application. Match design to deployment.
Marine deck case: 500x350x200mm IP65/IP67. Foam cutouts for surveying equipment, electronics. Salt-spray tested. EPDM O-ring standard.
Offshore oil and gas case: 600x450x250mm IP67. Foam cutouts for instrumentation, cables. Saltwater corrosion-resistant hardware. Pressure-equalisation valve.
ROV launch case: 700x500x300mm IP68. Foam cutouts for ROV tether, manipulator spares, lights. Manual pressure-equalisation valve. Subsea-rated O-ring (Viton or EPDM).
Diving equipment case: 500x400x250mm IP68 100m rated. Foam for regulators, dive computers, accessories. Heavy-duty O-ring. Optional camera port.
Outdoor expedition case: 600x400x250mm IP67 with IP68 upgrade option. Foam for camping, photography, electronics. Pressure-equalisation valve. EPDM O-ring.
MOQ と価格
Waterproof cases fall into three pricing tiers.
Tier 1 stock waterproof: 50-100 cases, USD 95-180/unit, 7-15 days production. IP65/IP67 standard.
Tier 2 custom OEM waterproof: 100-300 cases, USD 130-280/unit (case + foam + valve), 7-15 days production.
Tier 3 new mould waterproof: 1,000+ cases amortised, USD 90-220/unit post-amortisation, 60-90 days mould + 30-45 days production. IP68 deep rated.
なぜ防水ケースに KeXinMaterials を選ぶのか
KeXinMaterials operates 60+ injection machines in a 13,000 m² facility since 2014. PP, glass-filled PP, PA blends available. IP65/IP67/IP68 standard range.
Stock waterproof SKUs: 6 sizes from 350x250x150mm to 800x600x350mm. 50-piece MOQ for stock.
Material: PP copolymer (workhorse), glass-filled PP (IP68 premium), PA blends (subsea). O-rings: nitrile standard, EPDM / silicone / Viton on request.
Pressure-equalisation valve: automatic Gore-Tex standard on IP67 cases. Manual valve on request for IP68 subsea.
Certifications: IP65/IP67/IP68 batch test per SKU, MIL-STD-810G drop test per lot, CE / RoHS / REACH for EU export, FDA compatibility statement on request for medical SKUs.
Trade terms: EXW Shenzhen / FOB Shenzhen / FOB Ningbo. No DDP, no EU warehouse, no US warehouse. Every shipment direct from our 13,000 m² Guangdong facility.
重要なポイント
- IP65 = 低圧水ジェット / IP67 = 一時的浸漬 / IP68 = 連続浸漬
- O リング素材:シリコーン / ニトリル / EPDM / Viton は展開による
- 圧力平衡弁は高度変化運用に重要
- PP コポリ マーは標準 / IP68 はガラス充填 PP / 水中は PA ブレンド
- マリン deck / 洋上 / ROV / 潜水 / アウトドア — 用途別に変化
よくある質問
IP65、IP67、IP68 の違いは何ですか?
IP65:防塵 + 低圧水ジェット(12.5mm ノズル、30 kPa)。屋外 / 気象 deck / 建設 / 作業場に十分。IP67:防塵 + 1 メートル水への一時的浸漬 30 分。洋上 deck、マリン deck 測量、ヘリコプター貨物に必須。IP68:防塵 + 1-3 メートル深度での連続浸漬 30+ 分(深度はメーカー指定)。水中 ROV、海洋研究、潜水に必須。コスト差:IP65 ベース。IP67 +5-10%。IP68 +25-40%。
どの O リング素材を選択すべきですか?
シリコーン:温度範囲 -60°C 〜 +200°C、優れた UV およびオゾン耐性。MIL-PRF-GRF タクティカルケース標準。ニトリル(NBR):温度範囲 -40°C 〜 +120°C、良好な油および化学耐性。市販 IP67 ケース標準。EPDM:温度範囲 -50°C 〜 +150°C、優れた耐候性および化学耐性。屋外 / マリン用。Viton(FKM):温度範囲 -20°C 〜 +200°C、優れた化学および高温耐性。過酷な化学環境向けプレミアム。O リング圧縮:適切なシールのため 20-30%。
圧力平衡弁はいつ必要ですか?
高度変化運用のため常に:ヘリコプター貨物(急速な圧力変化)、山岳運用(輸送中の高度変化)、航空機貨物室(飛行中の急速な与圧変化)、ROV 発射 / 回収(表面-水中遷移)。圧力弁なし:降下時にケースがポップする可能性あり(高高度から低高度)、上昇時に開ける不可能になる可能性あり(低高度から高高度)。自動弁(Gore-Tex メンブレン)IP67 ケース標準。水中 ROV 発射用手動式バルブ。
防水ケースに最適な素材は何ですか?
PP コポリ マー:IP65/IP67 ケース標準。優れた耐衝撃性、低コスト。肉厚 3-5mm。ガラス充填 PP(10-30% ガラス):IP68 ケースのプレミアム剛性。MIL-PRF-GRF 荷重テスト必須。肉厚 4-6mm。PA(ナイロン)ブレンド:極限温度範囲(-40°C 〜 +80°C)。水中および航空宇宙用途向け。コスト USD 4-6/kg。
防水ケースの MOQ は?
ティア 1 在庫防水:50-100 ケース、USD 95-180/個、7-15 日生産。IP65/IP67 標準。ティア 2 カスタム OEM 防水:100-300 ケース、USD 130-280/個(ケース + フォーム + バルブ)、7-15 日生産。ティア 3 新規金型防水:1,000+ ケース償却、償却後 USD 90-220/個、60-90 日金型 + 30-45 日生産。IP68 深度等級。
防水ケースの IP 等級を検証するには?
4 段階検証:(1)ロットごとの試験証明書を要求(工場全体ではない)。(2)試験パラメータを検証:IP67 = 1m / 30 分浸漬。IP68 = 浸漬深度 + 時間指定。(3)O リング素材が展開と一致することを検証(シリコーン / ニトリル / EPDM / Viton)。(4)証明書のロット番号が物理的に出荷されたロットと一致することを検証。