2026-09-21 · KeXinMaterials 編集チーム
海洋 IP68 + DNV-GL 保護ケース:海洋 B2B 調達ガイド 2026
海洋 / 沖合 / 海軍アプリケーションには IP68 + 塩霧認証ケースが必要。DNV-GL は海洋業界の認証規格。IP67 は海洋には不十分;IP68 1.5m+ 浸漬と 60+ 分が必要。
海洋環境の課題
Marine / offshore / naval environments impose extreme challenges: salt water corrosion, UV radiation, immersion, ship vibration, temperature extremes. Standard IP67 cases are insufficient.
Salt water corrosion: NaCl in seawater is highly corrosive to metals. Stainless steel 316 / titanium recommended. Standard steel may fail in 6-12 months.
UV radiation: 24h sun exposure on deck causes UV degradation of PP / ABS / PU foam. UV-stabilized additives required for marine deployment.
Immersion: ship deck flooding, submarine storage, diving equipment. IP67 (1m 30min) insufficient. IP68 with 1.5m+ immersion and 60+ minutes required.
Ship vibration: continuous vibration from engine + wave motion. MIL-STD-810G method 514.6 vibration test required.
Temperature: arctic to tropical deployments. -40C to +70C range. MIL-STD-810G method 503.5 thermal shock test.
海洋 IP 等級(IP67 vs IP68 vs IP69K)
IP67 is insufficient for marine. IP68 with manufacturer-specified depth + time is standard. IP69K is high-pressure hot water (industrial cleaning).
IP67: dust-tight + temporary immersion 1m 30min. NOT adequate for marine. Standard industrial only.
IP68: dust-tight + continuous immersion. Manufacturer-specified depth and time. Standard marine spec: 1.5m to 3m for 60+ minutes. Premium marine spec: 5m to 10m for 60+ minutes.
IP69K: high-pressure hot water 80C + 80-100 bar pressure. Industrial cleaning / food processing. Rare for marine but used for ship deck wash-down.
Test methods: IEC 60529 (IP Code). Third-party lab test (TUV / SGS / Bureau Veritas) required for marine IP68 certification.
B2B buyer recommendation: specify IP68 with manufacturer-specified depth and time. Request test report. Avoid IP67 for marine / offshore.
DNV-GL 認証
DNV-GL (Det Norske Veritas + Germanischer Lloyd merged 2013) is the offshore industry certification standard. Required for offshore oil & gas, naval, commercial shipping.
DNV-GL certification scope: offshore oil & gas platforms, FPSOs, drilling rigs, naval vessels, commercial shipping, fishing vessels. Recognized globally.
Certification types: DNV-GL-OS (offshore), DNV-GL-ST (ships), DNV-GL-SE (special equipment), DNV-GL-CG (computational). For marine cases: DNV-GL-OS or DNV-GL-ST applicable.
Test requirements: drop, vibration, salt fog (ASTM B117 / MIL-STD-810G method 509.5), IP68 immersion, UV resistance, temperature cycling, EMC (electromagnetic compatibility for cases with electronics).
Certification cost: USD 30,000-80,000 per case model. Lead time 6-12 months. Annual surveillance audit required.
DNV-GL vs ATEX/IECEx: ATEX/IECEx is for explosive atmospheres (oil & gas). DNV-GL is for marine environments (offshore / naval). Both may apply to offshore drilling platforms.
塩霧 + UV テスト
Salt fog and UV are the two main aging factors for marine cases. Standard ASTM B117 + MIL-STD-810G method 509.5 salt fog; ASTM G154 / ISO 4892 UV.
Salt fog test: ASTM B117 (standard) or MIL-STD-810G method 509.5 (military). 48-96 hours minimum, 1000+ hours for offshore long-term. NaCl 5% solution, 35C, continuous spray.
UV test: ASTM G154 (UV fluorescent) or ISO 4892 (xenon arc). 1000-2000 hours typical. UVB-313 lamp + UVA-340 lamp combinations. PP / ABS / PU foam must use UV-stabilized additives.
Material selection: PP + UV additive > standard PP. Stainless steel 316 / titanium > standard steel. Closed-cell PU foam > open-cell PU foam (water absorption).
Hardware: stainless steel 316 / titanium hardware. Standard brass / zinc may fail in 12-24 months. Aluminum may pit from salt.
B2B buyer action: request salt fog test report (ASTM B117 or MIL-STD-810G method 509.5) with 1000+ hours. Request UV test report (ASTM G154 or ISO 4892) with 1000+ hours.
海洋 B2B ユースケース
Different marine applications require different case specs. Below is the typical 2026 B2B procurement recommendation.
Offshore oil & gas platform (Zone 1 + marine): Ex d + IP68 + DNV-GL + MIL-STD-810G + salt fog + UV + conductive foam. Required: ATEX + IECEx + DNV-GL triple certification.
Naval vessel (military marine): IP68 + MIL-STD-810G + salt fog + EMC. Required: NSN registration + Berry Amendment + DNV-GL.
Commercial shipping (electronics, instruments): IP68 + MIL-STD-810G + salt fog + UV. Required: CE / ROPS.
Fishing vessel (rugged use): IP68 + drop + vibration + salt fog. Lower cost marine case. NO DNV-GL required (small craft).
Submarine / diving equipment: IP68 5m+ + 60+ minutes + pressure tested. Special marine spec.
Marine research (scientific instruments): IP68 + UV + MIL-STD-810G + EMC. Required for oceanographic research.
海洋材料選択
Marine cases require specialized material selection. Below is the typical 2026 B2B recommendation.
Shell material: PP + GF (glass fiber) or PP + UV additive. UV stabilizer (carbon black 0.5-2% or hindered amine light stabilizer / HALS) extends outdoor durability.
Foam interior: closed-cell PU foam with anti-microbial additive. Open-cell PU foam may absorb water. Anti-static or conductive foam for Zone 1 electronics.
Hardware: stainless steel 316 / titanium hardware. Standard brass / zinc may corrode. Avoid standard steel.
Gasket: silicone rubber gasket. Standard EPDM may degrade in salt spray. Silicone preferred for marine.
Color: typically orange / yellow / black for marine visibility. Reflective tape optional for night recovery.
コスト + リードタイム + MOQ
Marine IP68 + DNV-GL cases have higher cost and longer lead time due to certification and specialty materials.
Stock SKU (IP68 only): USD 200-500. Self-certification. Lead time 7-15 days.
Stock SKU (IP68 + MIL-STD-810G + salt fog): USD 400-1000. Self-certification or third-party. Lead time 15-30 days.
Custom OEM (IP68 + DNV-GL): USD 1000-3000. Third-party DNV-GL certification. Lead time 90-180 days.
Custom OEM (IP68 + DNV-GL + ATEX/IECEx): USD 1500-5000. Triple certification. Lead time 120-240 days.
MOQ: stock 10-50 cases. Custom OEM 50-200 cases. Lower MOQ for Zone 2 cases than Zone 1 / DNV-GL.
KeXinMaterials 海洋能力
KeXinMaterials offers IP68 + DNV-GL + ATEX/IECEx marine cases. EXW Springer / FOB Shanghai / FOB Ningbo only.
IP68: 1.5m to 10m immersion, 60+ minutes. IEC 60529 third-party tested.
Salt fog: ASTM B117 1000+ hours. MIL-STD-810G method 509.5. Third-party tested.
UV: ASTM G154 1000+ hours. UV-stabilized PP + GF material.
DNV-GL: third-party certification partnership. Lead time 90-180 days.
Combined IP68 + DNV-GL + ATEX/IECEx: offshore triple certification. USD 1500-5000 per case.
重要なポイント
- IP67 海洋には不十分;IP68 1.5m+ 60+ 分が必要
- DNV-GL 認証:USD 30,000-80,000/ケース、リードタイム 6-12 か月
- 塩霧 ASTM B117 / MIL-STD-810G 509.5:1000+ 時間最低
- UV ASTM G154 / ISO 4892:1000+ 時間、UV 安定化 PP 必要
- 素材:SS 316 / チタン ハードウェア;シリコン ガスケット;クローズドセル PU フォーム
よくある質問
IP67 は海洋用途に十分ですか?
いいえ。IP67 は防塵 + 一時浸入 1m 30 分。海洋 / 沖合 / 海軍用途には、IP68 メーカー指定深度(1.5m〜10m)と時間(60+ 分)が必要。
DNV-GL と ATEX/IECEx の違いは何ですか?
DNV-GL は海洋業界の認証規格。ATEX/IECEx は爆発性雰囲気認証。補完的で、代替ではありません。
塩霧テストにはどのくらい時間がかかりますか?
塩霧テスト(ASTM B117 / MIL-STD-810G 509.5)は期間によって 4-12 週間かかります。
海洋ケースに最適なハードウェアは何ですか?
海洋ケースにはステンレス 316 またはチタンが望ましい。
漁船に DNV-GL は必要ですか?
いいえ。DNV-GL は沖合石油・ガス プラットフォーム、海軍艦艇、商船に必要です。
ASTM B117 と MIL-STD-810G 509.5 の違いは何ですか?
ASTM B117 は標準塩霧テスト(工業)。MIL-STD-810G 509.5 は軍事塩霧テスト。
DNV-GL 認証にはどのくらい時間がかかりますか?
DNV-GL 認証はケースモデルごとに 6-12 か月。費用 USD 30,000-80,000。