2026-09-21 · KeXinMaterials 編集チーム
ATA 300 カテゴリー I 放送写真家航空機預入可能ケース:B2B ガイド (2026)
ATA 300 カテゴリー I は、真のプロフェッショナルケースと消費者向けローラーを区別する航空業界標準です。これがどのように機能するか、なぜ B2B に重要か、工場から直接調達する方法を紹介します。
ATA 300 カテゴリー I が実際にテストすること
ATA Specification 300 is published by the Air Transport Association. Category I is the most stringent — the case must survive 100 round-trip airline baggage cycles.
ATA 300 Category I test sequence: 100 cycles each of (1) drop test from 1.5m onto hard surface, (2) vibration simulating aircraft turbulence, (3) humidity exposure at 95% RH, (4) pressure changes simulating 4,000m altitude equivalent. After 100 cycles, the case must remain operational.
Operational means latches close and latch securely, hinges pivot without binding, wheels rotate freely, telescopic handle extends and locks, O-ring seals maintain IP rating. Visual cosmetic damage is acceptable; functional failure is not.
Category II is less stringent (50 cycles). Category III is consumer-grade (10 cycles). For professional broadcast / photography / field-tech, Category I is the relevant certification.
なぜ ATA 300 が B2B に重要か
A consumer roller may look identical but fails at trip 30. The cost of failure is gear damage + production delays.
B2B failure modes without ATA 300: (1) Latch breaks at trip 30, case opens during transit, gear lost or damaged. (2) Wheel shears off, case undeliverable. (3) Handle jams, case undeliverable. (4) Pressure changes pop the case open on descent, contents exposed.
Cost of failure: USD 30,000-150,000 of gear + production delay + reshoot cost. A USD 300-500 premium for ATA 300 certified case pays for itself in 1 trip.
For broadcast crews that fly weekly with cameras and audio gear, photographer expeditions, and field-tech teams, ATA 300 is non-negotiable.
ATA 300 と組み合わせるその他の認証
ATA 300 covers airline handling. IP67 and MIL-STD-810G cover the other environmental stresses.
IP67: protects against water and dust ingress. Required for coastal, marine, or rainy location work. Standard on our ATA 300 certified trolley cases.
MIL-STD-810G: covers drop, vibration, temperature, humidity. Required for defence, SAR, inspection, and outdoor expeditions. Often paired with ATA 300.
Pressure-equalisation valve: critical for helicopter cargo, mountain operations, and aircraft cargo holds. The valve allows air pressure to equalise between case interior and atmosphere.
For B2B programmes targeting multiple environments, ATA 300 + IP67 + MIL-STD-810G is the standard certified combination.
工場の ATA 300 主張を検証する方法
Marketing claims often exceed reality. Verify ATA 300 with batch test certificate.
Four verification steps: (1) Request lot-specific test certificate. Generic factory-wide certificate is weaker than per-shipment-lot certificate. (2) Check the issuing lab — third-party accredited lab preferred over in-house factory lab. (3) Verify test parameters — 100 cycles each of drop / vibration / humidity / pressure. (4) Cross-check lot number on certificate matches the lot physically shipped.
Procurement trap: factory has 2020 ATA 300 certificate. If mould design, material, or supplier changed, certificate no longer applies. Always request certificate dated within 12 months of shipment.
B2B 調達:在庫 vs カスタム OEM
Three sourcing paths for ATA 300 certified cases. Match path to programme size.
Path 1 — Stock ATA 300 SKU: 50-100 cases, USD 180-320/unit, 15-25 days production. For pilot programmes, agency buyers, regional distributors.
Path 2 — Custom OEM on stock mould: 100-300 cases, USD 280-520/unit (case + custom foam + ATA 300), 30-45 days production. For branding programmes, OEM tool kit assembly, mid-volume distributors.
Path 3 — New mould full custom: 1,000+ cases amortised over 12-24 months, USD 220-450/unit post-amortisation, 60-90 days mould + 30-45 days production. For brand-owned broadcast / photographer programmes.
用途別ケース設計
ATA 300 certified cases vary in design by application. Choose based on gear.
- Broadcast camera case: 600x450x250mm trolley. Foam cutouts for camera body, lenses, monitor, audio mixer, batteries, cables. Padded dividers for lens set.
- Field-tech laptop case: 500x350x180mm trolley. Foam cutout for 17-inch laptop, tablet, cables, accessories. Pressure-equalisation valve.
- Photographer expedition case: 700x500x300mm trolley. Foam cutouts for camera body, multiple lenses, flash, tripod (folded), accessories.
- Survey equipment case: 600x450x250mm trolley. Foam cutouts for total station, data collector, prism, tripod, accessories.
- Inspection equipment case: 600x450x250mm trolley. Foam cutouts for thermal imager, borescope, ultrasonic detector, accessories.
なぜ ATA 300 ケースに KeXinMaterials を選ぶのか
KeXinMaterials operates 60+ injection machines in a 13,000 m² facility since 2014. ATA 300 Category I across our trolley case SKU range. Third-party lab certificates per shipment lot.
Stock ATA 300 SKUs: 6 sizes from 18-inch carry-on to 32-inch expedition. 50-piece MOQ for stock. 100-piece MOQ for custom OEM.
Material: PP copolymer (workhorse), glass-filled PP (premium stiffness), PC / PC-ABS blend (premium clarity). Wheels: 50mm inline skate or 60mm spinner. Telescopic handle: 3-stage aluminium.
Certifications: ATA 300 Category I (per trolley SKU, third-party lab certificate), IP67 (per batch test), MIL-STD-810G drop / vibration / temperature / humidity (per lot report), CE / RoHS / REACH for EU export.
Trade terms: EXW Shenzhen / FOB Shenzhen / FOB Ningbo. No DDP, no EU warehouse, no US warehouse. Every shipment direct from our 13,000 m² Guangdong facility.
重要なポイント
- ATA 300 カテゴリー I = 100 回の航空サイクル(落下、振動、湿度、圧力)
- ATA 300 の B2B プレミアム = USD 300-500/ケース(対消費者向けローラー USD 90-150)
- 工場のマーケティング主張ではなく、ロット固有の第三者ラボ証明書で検証
- 包括的なカバレッジのために IP67(水)+ MIL-STD-810G(落下/振動/温度)と組み合わせる
- 圧力平衡弁はヘリコプター / 山岳 / 航空貨物運用に重要
よくある質問
ATA 300 カテゴリー I は実際に何をテストしますか?
ATA 仕様 300 カテゴリー I テストシーケンス:それぞれ(1)硬表面への 1.5m からの落下テスト、(2)航空機乱気流をシミュレートする振動、(3)95% RH での湿度暴露、(4)4,000m 高度相当をシミュレートする圧力変化の 100 サイクル。100 サイクル後、ケースは動作可能である必要があります(ラッチ、ヒンジ、車輪、伸縮ハンドル、O リングシール)。カテゴリー II は 50 サイクル、カテゴリー III は 10 サイクル(消費者向け)。プロフェッショナル放送/写真/現場技術者向けには、カテゴリー I が関連する認証です。
なぜ ATA 300 は B2B に重要ですか?
ATA 300 なしの B2B 障害モード:旅行 30 でラッチが破損、ケースが輸送中に開き、機材が紛失または損傷;車輪が破損、ケースが配送不能;ハンドルが固着、ケースが配送不能;圧力変化で下降時にケースが弾け、内容物が露出。障害コスト:USD 30,000-150,000 の機材 + 制作遅延 + 再撮影コスト。ATA 300 認定ケースの USD 300-500 プレミアムは 1 回の旅行で元が取れる。毎週飛行する放送、写真、現場技術者チームにとって、ATA 300 は交渉できません。
工場の ATA 300 主張をどのように検証しますか?
4 段階検証:(1)ロット固有の試験証明書を要求する。工場全体の一般証明書は出荷ロットごとの証明書より弱い。(2)発行ラボを確認する — 社内工場ラボよりも認定された第三者ラボが望ましい。(3)試験パラメータを検証する — 落下/振動/湿度/圧力の各 100 サイクル。(4)証明書上のロット番号が物理的に出荷されたロットと一致することを確認する。調達トラップ:工場に 2020 年の ATA 300 証明書がある。金型設計、材料、またはサプライヤーが変更された場合、証明書は適用されません。
ATA 300 は他の認証とどのように組み合わせますか?
ATA 300 は航空取り扱い(落下/振動/湿度/圧力変化)をカバーします。IP67 は水と粉塵の侵入をカバーします。MIL-STD-810G は落下/振動/温度/湿度をカバーします。圧力平衡弁は高度変化をカバーします。複数の環境をターゲットとする B2B プログラムでは、ATA 300 + IP67 + MIL-STD-810G が標準認定組み合わせです。
ATA 300 ケースの MOQ とリードタイムは?
在庫 ATA 300 SKU:MOQ 50-100 ケース、USD 180-320/個、15-25 日生産。在庫金型上のカスタム OEM:MOQ 100-300 ケース、USD 280-520/個(ケース + カスタムフォーム + ATA 300)、30-45 日生産。新規金型フルカスタム:MOQ 1,000+ ケースを 12-24 ヶ月で償却、償却後 USD 220-450/個、60-90 日金型 + 30-45 日生産。
放送/写真家アプリケーションに適したケースデザインは?
放送カメラケース:600x450x250mm トロリー。カメラ本体、レンズ、モニター、オーディオミキサー、バッテリー用のフォームカットアウト。レンズセット用のパッド入り仕切り。現場技術者ノートパソコンケース:500x350x180mm トロリー。17 インチノートパソコン、タブレット、ケーブル用のフォームカットアウト。圧力平衡弁。写真家遠征ケース:700x500x300mm トロリー。カメラ本体、複数レンズ、フラッシュ、三脚(折りたたみ)、アクセサリー用のフォームカットアウト。