2026-09-21 · KeXinMaterials 编辑团队
防护箱定制:Logo/颜色/泡沫/硬件 B2B 指南 2026
B2B 防护箱定制包括 logo 印刷、颜色定制、定制泡沫内胆、定制硬件(铰链/锁扣/把手/轮子)、OEM 模具开发。
定制概览
B2B case customization has 5 dimensions: logo printing, color customization, custom foam, custom hardware, and OEM mold. Each with different cost + MOQ + lead time.
Logo printing: lowest cost customization. USD 0.50-5 per case over setup. MOQ 2,000 cases. Lead time 1-2 weeks.
Color customization: medium cost. USD 1-5 per case over stock color. MOQ 5,000-20,000 cases (full color batch). Lead time 2-4 weeks.
Custom foam: medium cost. USD 5-50 per case over standard foam. MOQ 50-500 cases. Lead time 2-4 weeks (custom design + sampling).
Custom hardware: medium-high cost. USD 5-20 per case over stock hardware. MOQ 100-500 cases. Lead time 4-8 weeks.
OEM mold: highest cost. USD 5,000-50,000 one-time tooling. MOQ 1,000-10,000 cases. Lead time 30-90 days.
B2B buyer strategy: prioritize low-cost customization first (logo + color + standard foam), upgrade to custom foam + hardware for premium SKUs, use OEM mold only for high-volume or strategic products.
Logo 印刷方法
Logo printing on case exterior has 4 main methods: silkscreen printing, pad printing, laser engraving, and in-mold labeling. Each with different cost + durability + MOQ.
Silkscreen printing: most common. 1-4 colors. USD 0.50-3 per case. Durable 2-3 years outdoor. MOQ 500 cases. Lead time 1-2 weeks.
Pad printing: 1-2 colors. USD 0.50-2 per case. Less durable than silkscreen (1-2 years). MOQ 200 cases. Lead time 1-2 weeks.
Laser engraving: no color, etched surface. USD 0.30-1 per case. Permanent (cannot fade). MOQ 100 cases. Lead time 1 week.
In-mold labeling (IML): embedded label during injection molding. USD 1-5 per case. Most durable (5-10 years). MOQ 5,000-20,000 cases (full batch). Lead time 4-8 weeks (mold label preparation + mold trial).
B2B recommendation: silkscreen for general use, laser engraving for low-MOQ or premium, IML for high-volume or longest life.
颜色定制
Color customization is done by adding pigment / masterbatch to base PP / ABS / PC resin. Color match is critical for brand consistency.
Stock color: black, gray, olive, yellow, orange, red, blue. No additional setup. MOQ 1 case.
Standard color: white, silver, custom primary colors. USD 1-3 per case over stock. MOQ 500-2,000 cases (color batch).
Custom color: Pantone match or sample match. USD 3-10 per case over stock. MOQ 5,000-20,000 cases (full color batch).
Color masterbatch: 1-3% added to base resin. Mixed color industry standard.
Color fastness: UV-A to UV stabilization required for non-black colors. Black color most UV stable (carbon black).
Lead time: 2-4 weeks for new color masterbatch + mold trial. Stock color no lead time.
定制泡沫内胆
Custom foam interior provides precision fit + professional presentation. CNC routed PU foam or die-cut EVA foam. Selection depends on volume + complexity.
Pick-and-pluck PE foam: cheapest. Buyer plucks cubes manually. MOQ 10 cases. Lead time 0-1 day.
CNC routed PU foam: precision. CAD → G-code → hotwire / mill. MOQ 50-500 cases. Lead time 2-4 weeks.
Die-cut EVA foam: medium precision. Die + press. MOQ 100-2,000 cases. Lead time 2-4 weeks.
3D heat-formed EVA foam: high precision for repeated shapes. MOQ 500-5,000 cases. Lead time 4-8 weeks.
Custom design cost: USD 300-2,000 per SKU one-time design. Free if buyer provides 3D CAD model.
B2B recommendation: pick-and-pluck for prototyping. CNC PU foam for premium / high-volume.
硬件定制(铰链/锁扣/把手)
Custom hardware changes mold dimensions + tooling. Higher cost than standard hardware but enables unique product positioning.
Custom hinge: USD 3-5 per case over standard. Mold change cost USD 5,000-15,000. MOQ 5,000-20,000 cases.
Custom latch: USD 2-4 per case over standard. Mold change cost USD 3,000-10,000. MOQ 5,000-20,000 cases.
Custom handle: USD 2-3 per case over standard. Mold change cost USD 3,000-8,000. MOQ 10,000-20,000 cases.
Custom wheel: USD 2-5 per case over standard. Mold change cost USD 5,000-15,000. MOQ 5,000-20,000 cases.
Mold change lead time: 30-60 days. Sample 1-2 weeks after mold.
B2B recommendation: standard hardware for most cases. Custom hardware only for strategic products.
OEM 模具开发
OEM mold development enables full custom case (size, shape, color, hardware). Highest cost customization but enables unique product.
Mold cost: USD 5,000-50,000 per mold. Single cavity (1 case per cycle) USD 5,000-15,000. Multi-cavity (4-8 cases per cycle) USD 15,000-50,000.
Mold material: P20 steel for short runs (50,000-200,000 cycles). H13 steel for long runs (1,000,000+ cycles). S7 steel for high-volume (5,000,000+ cycles).
Mold lead time: 30-90 days. Sample lead time: 1-2 weeks. Mass production lead time: 30-60 days.
Mold ownership: buyer (most common), factory (alternative for cost sharing), or shared (cost sharing for lower MOQ).
Mold lifetime: 100,000-500,000 shots for P20, 1M+ for H13, 5M+ for S7.
B2B recommendation: OEM mold only for high-volume (5,000+ cases/year) or strategic products. Shared mold for medium volume (1,000-5,000 cases/year).
B2B 定制策略
Different B2B applications require different customization strategies. Below is the 2026 recommendation.
Camera / broadcast brand (Pelican / SKB / Gator equivalent): premium customization. Logo + color + custom foam + OEM mold. B2B buyer specs premium customization.
Drone brand: medium customization. Logo + standard color + custom foam + OEM mold. B2B buyer specs medium customization.
Military / tactical brand: standard customization. Logo + standard hardware + custom foam. OEM mold rarely (standard cases fit).
Medical brand: high customization. Custom foam + medical-grade material + OEM mold. B2B buyer specs high customization for clinical workflow.
Industrial brand: low customization. Logo + standard color + standard foam + standard hardware. B2B buyer specs low customization for cost-effectiveness.
成本 + 交期 + 起订量汇总
Case customization cost + lead time summary. Approximate 2026 data.
Logo silkscreen: USD 0.50-3 / case. MOQ 500. Lead time 1-2 weeks.
Logo laser engraving: USD 0.30-1 / case. MOQ 100. Lead time 1 week.
Logo in-mold label: USD 1-5 / case. MOQ 5,000-20,000. Lead time 4-8 weeks.
Color standard: USD 0 / case. MOQ 100. Lead time 0.
Color custom: USD 1-10 / case. MOQ 500-20,000. Lead time 2-4 weeks.
Foam pick-and-pluck: USD 1-5 / case. MOQ 10. Lead time 0-1 day.
Foam CNC PU: USD 20-100 / case. MOQ 50-500. Lead time 2-4 weeks.
Foam EVA die-cut: USD 10-30 / case. MOQ 100-2,000. Lead time 2-4 weeks.
Hardware standard: USD 0 / case. MOQ 100. Lead time 0.
Hardware custom: USD 2-5 / case + mold USD 5,000-15,000. MOQ 5,000-20,000. Lead time 30-60 days.
OEM mold: USD 5,000-50,000 / mold. MOQ 1,000-10,000. Lead time 30-90 days.
核心要点
- Logo 丝印:USD 0.50-3/箱,起订量 500,1-2 周(入门级)
- 颜色定制:USD 1-10/箱,起订量 500-20,000,2-4 周
- 泡沫 CNC PU 定制:USD 20-100/箱,起订量 50-500,2-4 周
- 硬件定制:USD 2-5 + 模具 USD 5,000-15,000,起订量 5,000-20,000,30-60 天
- OEM 模具:USD 5,000-50,000,起订量 1,000-10,000,30-90 天(仅战略)
常见问题
定制防护箱最便宜的方法是什么?
Logo 印刷(丝印或激光雕刻)是最便宜的定制。每箱 USD 0.30-3。起订量 100-500 箱。交期 1-2 周。
定制颜色的最低起订量是多少?
定制颜色起订量通常 500-20,000 箱。
OEM 模具开发值得吗?
OEM 模具开发仅对大批量(5,000+/年)或战略产品值得。
什么是模内标签(IML)?
IML(模内标签)是将预印标签嵌入到注塑防护箱外壳的工艺。
最耐用的 logo 印刷方法是什么?
IML 是最耐用的(户外 5-10 年)。
OEM 模具开发需要多长时间?
OEM 模具开发本身需要 30-90 天。
我能定制库存箱吗?
可以。库存支持 logo 印刷、标准颜色匹配、定制泡沫内胆、硬件更换。