Detailed specs for Extra Large scuba-mask-fins-case Manufacturer from KeXinMaterials source factory. Outer/inner dimensions in mm/inch, weight, material, foam options. Compare WL1204 series. MOQ 100. 12h quote, 25-day delivery.
If you are sourcing Extra Large scuba-mask-fins-case Manufacturer from a Chinese factory, you have probably seen marketing sheets with vague dimensions and a single IP rating. We do the opposite. Every dimension here is measured at the QC station, every rating is third-party tested.
Below is the catalog data for Extra Large scuba-mask-fins-case Manufacturer. Each model has outer dimensions (in mm), inner cavity (mm), empty weight (g), and material specification. Material is engineering PP or PP+GF for impact resistance. Foam set is included: 25mm base + 10mm lid convoluted.
| Model | Outer (mm) | Inner (mm) | Weight (g) | Material | Size Class |
|---|---|---|---|---|---|
| WL1204 | 120×90×40 mm | 115×78×32 mm | 100 g | PP | Phone / Wallet |
| WL2005 | 195×170×46 mm | 190×135×40 mm | 175 g | PP | Action Camera / GoPro |
| WL5020 | 500×400×200 mm | 480×360×185 mm | 2400 g | PP | Kayak / Fishing Gear |
The most common model for "Extra Large scuba-mask-fins-case Manufacturer" buyers is the WL1204 (120×90×40 mm OD, 100 g empty weight, PP body).
Cheap protective cases use 15 kg/m³ foam that bottoms out after 6 months. Our Extra Large scuba-mask-fins-case Manufacturer uses 25 kg/m³ foam rated for 5+ year use. The difference is in the cell structure: 25 kg/m³ cells rebound after compression, 15 kg/m³ cells do not. We have tested both. The cheaper foam fails.
The shell is rated IP68 (submersible 5m / 30 min) ingress protection and validated to MIL-STD-810H Method 516.8 (26 drops at 2.0m). Temperature range is -30 ~ +80 °C. The automatic pressure-equalization valve keeps the seal intact during air transport and at altitude. Latch is a double-throw design rated for 5,000 open/close cycles. All units are 100% inspected for wall thickness uniformity, latch engagement, and foam adhesion before shipping.
We maintain 200+ foam-cut reference designs for Extra Large scuba-mask-fins-case Manufacturer, covering camera bodies, drone kits, broadcast gear, military equipment, medical devices, and industrial tools. Send us your equipment list, we will match to the closest reference or draft a new layout free within 24 hours.
Cheap Extra Large scuba-mask-fins-case Manufacturer: $3-8/unit, 6-month lifespan, 200-cycle latch, 15 kg/m³ foam. Our Extra Large scuba-mask-fins-case Manufacturer: $5-15/unit, 10-year lifespan, 5,000-cycle latch, 25 kg/m³ foam. Over 5 years, our case is 4-5x cheaper per year of use. Total cost of ownership wins.
For alternatives: soft padded bags (¥50–200, $7–30) are cheaper but offer no real protection and last 6 months. Aluminum hard cases ($80–300) are heavier, prone to denting, and 2–4× the price. Carbon fiber cases ($300+) are overkill for 95% of B2B use cases. Our PP/PC engineering cases hit the sweet spot: 90% of the protection of aluminum at 30% of the weight and 50% of the cost, with 10-year typical service life.
Ordering Extra Large scuba-mask-fins-case Manufacturer is 5 steps: inquiry (12h response), quote (with recommendation), PO + 30% deposit, production (25 days + QC photos), balance payment + shipment. Repeat orders are 15-20 days. Custom OEM/ODM adds 25-30 days for mold.
Buyers who care about real specs (not marketing specs) end up working with us. We have shipped to 200+ spec-conscious buyers in 2024.
Established 2014. 13,000 sqm factory in Fusha Industrial Park, Zhongshan, Guangdong. 12 production lines, 60+ injection molding machines, 100+ employees, 20+ patents. Monthly capacity 80,000 units. Annual export revenue 8M+ USD to 47 countries.
Direct from the OEM. Unlike trading companies or sourcing agents who add 15–40% markup and disappear after delivery, KeXinMaterials handles everything in-house: mold development, injection molding, foam CNC cutting, QC testing, export documentation. Our 2024 buyer survey showed 87% repeat-order rate and 0.3% defect rate across 47 countries.
| Quantity | Unit Price | Discount | Lead Time | Sample |
|---|---|---|---|---|
| 50-99 pcs | USD 12.35 | — | 20 days | Free (pay shipping) |
| 100-199 pcs | USD 10.92 | 5% off | 25 days | Free (pay shipping) |
| 200-499 pcs | USD 9.50 | 10% off | 30 days | Free (pay shipping) |
| 500-999 pcs | USD 8.55 | 15% off | 30 days | Free (pay shipping) |
| 1000+ pcs | USD 7.60 | 20% off | 35-45 days | Free (pay shipping) |
Reference price for WL1204 (120×90×40 mm). Custom sizes, colors, foam add 5–30%. Quote valid 30 days.
Extra Large scuba-mask-fins-case Manufacturer: WL Series Specs Comparison
Visual summary of the key specifications. Print-friendly for buyer reference.
📹 60-second factory + product walkthrough. Extra Large scuba-mask-fins-case Manufacturer dimension comparison, foam cutting precision, factory QC line
Yes. 60+ machines, 12 production lines, 150+ custom sizes since 2014. Custom molds: 30-day lead time, MOQ 500 units, $3,000-8,000 mold fee (waived for orders >5,000 units). Send your 3D model to kexin@beeaa.com for instant feasibility check.
Standard wall thickness is 3.0-3.5mm. The 3mm walls pass IP67, the 3.5mm walls pass IP68. Wall thickness is measured at 4 points on every production batch and recorded in the lot certificate.
We use a stainless steel pin hinge (3mm diameter for small, 5mm for large) rated for 10,000 open/close cycles. Hinge caps are molded into the case body, not screwed on. The hinge pin is removable for foam service.
Standard foam set is 25mm base + 10mm convoluted lid foam, CNC-cut to 0.5mm tolerance. Total foam thickness 35mm. Custom foam thickness available: 15-50mm base, with or without anti-static (ESD) treatment.
Standard: IP67 (submersible 1m / 30 min). Premium: IP68 (submersible 5m / 30 min) available for select models with reinforced seals and pressure valve. All IP tests performed by SGS, TUV, or Intertek at our lab in Zhongshan.
Free 5-day prototyping. ISO 9001 factory-direct. Ships to 47 countries.