Detailed specs for Mini sample-case Manufacturer from KeXinMaterials source factory. Outer/inner dimensions in mm/inch, weight, material, foam options. Compare WL3812-T series. MOQ 30. 12h quote, 35-day delivery.
Choosing Mini sample-case Manufacturer comes down to three numbers: outer dimensions, inner cavity, and the gear you are protecting. We have been publishing the full WL series spec data since 2014. This page is the complete reference.
For Mini sample-case Manufacturer, the WL series splits into Small (WL1204-1504), Medium (WL1905-2808), and Large (WL3812-5020). Within each tier, 2-3 models vary in width and depth. We help you choose during the 12h quote consultation, but the table below is the reference.
| Model | Outer (mm) | Inner (mm) | Weight (g) | Material | Size Class |
|---|---|---|---|---|---|
| WL3812-T | 380×320×120 mm | 365×280×110 mm | 1400 g | PP+Aluminum Frame | Sales Rep Kit |
| WL5020-T | 500×400×200 mm | 480×360×185 mm | 3100 g | PP+Aluminum Frame | Trade Show Case |
| WL6030-T | 600×450×300 mm | 575×420×280 mm | 4900 g | PP+Aluminum Frame | Exhibition Display |
The most common model for "Mini sample-case Manufacturer" buyers is the WL3812-T (380×320×120 mm OD, 1400 g empty weight, PP+Aluminum Frame body).
Cheap protective cases use 15 kg/m³ foam that bottoms out after 6 months. Our Mini sample-case Manufacturer uses 25 kg/m³ foam rated for 5+ year use. The difference is in the cell structure: 25 kg/m³ cells rebound after compression, 15 kg/m³ cells do not. We have tested both. The cheaper foam fails.
The shell is rated IP54 (splash-resistant, not submersible) ingress protection and validated to MIL-STD-810H Method 516.8 (26 drops at 1.2m). Temperature range is -40 ~ +80 °C. The automatic pressure-equalization valve keeps the seal intact during air transport and at altitude. Latch is a double-throw design rated for 5,000 open/close cycles. All units are 100% inspected for wall thickness uniformity, latch engagement, and foam adhesion before shipping.
Here are 3 real Mini sample-case Manufacturer foam layouts from 2024-2026: (A) Sony A7 IV + 24-70mm + 70-200mm + 3 filters + 2 batteries — fits WL2808. (B) DJI Mavic 3 + RC + 4 batteries + charger — fits WL2005. (C) RED Komodo + 2 lenses + monitor + cables — fits WL5020. We share these at the 12h quote stage.
For Mini sample-case Manufacturer: filmmakers should prioritize WL2808-WL5020 with custom foam. Drone operators: WL2005-WL2808 with battery cavities. Broadcast: WL3812-WL5020 with monitor + cable management. Military: WL3812-WL5020 with PP+GF and IP67. Medical: WL1504-WL2808 with anti-microbial foam.
For alternatives: soft padded bags (¥50–200, $7–30) are cheaper but offer no real protection and last 6 months. Aluminum hard cases ($80–300) are heavier, prone to denting, and 2–4× the price. Carbon fiber cases ($300+) are overkill for 95% of B2B use cases. Our PP/PC engineering cases hit the sweet spot: 90% of the protection of aluminum at 30% of the weight and 50% of the cost, with 10-year typical service life.
After Mini sample-case Manufacturer ships: (1) We send QC photos before shipment. (2) Lot certificate with serial numbers. (3) 90-day defect replacement. (4) Foam re-cut service for equipment changes. (5) 5-year case body warranty. (6) Tooling stored 3 years for easy reorder.
Most suppliers list dimensions in a single unit. We publish both metric and imperial, with QC-verified tolerances, on every spec sheet.
Established 2014. 13,000 sqm factory in Fusha Industrial Park, Zhongshan, Guangdong. 12 production lines, 60+ injection molding machines, 100+ employees, 20+ patents. Monthly capacity 80,000 units. Annual export revenue 8M+ USD to 47 countries.
Direct from the OEM. Unlike trading companies or sourcing agents who add 15–40% markup and disappear after delivery, KeXinMaterials handles everything in-house: mold development, injection molding, foam CNC cutting, QC testing, export documentation. Our 2024 buyer survey showed 87% repeat-order rate and 0.3% defect rate across 47 countries.
| Quantity | Unit Price | Discount | Lead Time | Sample |
|---|---|---|---|---|
| 50-99 pcs | USD 37.70 | — | 20 days | Free (pay shipping) |
| 100-199 pcs | USD 33.35 | 5% off | 25 days | Free (pay shipping) |
| 200-499 pcs | USD 29.00 | 10% off | 30 days | Free (pay shipping) |
| 500-999 pcs | USD 26.10 | 15% off | 30 days | Free (pay shipping) |
| 1000+ pcs | USD 23.20 | 20% off | 35-45 days | Free (pay shipping) |
Reference price for WL3812-T (380×320×120 mm). Custom sizes, colors, foam add 5–30%. Quote valid 30 days.
Mini sample-case Manufacturer: WL Series Specs Comparison
Visual summary of the key specifications. Print-friendly for buyer reference.
📹 60-second factory + product walkthrough. Mini sample-case Manufacturer dimension comparison, foam cutting precision, factory QC line
Yes. 60+ machines, 12 production lines, 150+ custom sizes since 2014. Custom molds: 30-day lead time, MOQ 500 units, $3,000-8,000 mold fee (waived for orders >5,000 units). Send your 3D model to kexin@beeaa.com for instant feasibility check.
Standard wall thickness is 3.0-3.5mm. The 3mm walls pass IP67, the 3.5mm walls pass IP68. Wall thickness is measured at 4 points on every production batch and recorded in the lot certificate.
We use a stainless steel pin hinge (3mm diameter for small, 5mm for large) rated for 10,000 open/close cycles. Hinge caps are molded into the case body, not screwed on. The hinge pin is removable for foam service.
Standard foam set is 25mm base + 10mm convoluted lid foam, CNC-cut to 0.5mm tolerance. Total foam thickness 35mm. Custom foam thickness available: 15-50mm base, with or without anti-static (ESD) treatment.
Standard: IP67 (submersible 1m / 30 min). Premium: IP68 (submersible 5m / 30 min) available for select models with reinforced seals and pressure valve. All IP tests performed by SGS, TUV, or Intertek at our lab in Zhongshan.
Free 5-day prototyping. ISO 9001 factory-direct. Ships to 47 countries.