Detailed specs for Medium cosmetic-case Manufacturer from KeXinMaterials source factory. Outer/inner dimensions in mm/inch, weight, material, foam options. Compare WL3812-T series. MOQ 30. 12h quote, 35-day delivery.
We have supplied Medium cosmetic-case Manufacturer to camera operators, drone pilots, broadcasters, and military contractors since 2014. This is the data sheet we send to all of them.
Below is the catalog data for Medium cosmetic-case Manufacturer. Each model has outer dimensions (in mm), inner cavity (mm), empty weight (g), and material specification. Material is engineering PP or PP+GF for impact resistance. Foam set is included: 25mm base + 10mm lid convoluted.
| Model | Outer (mm) | Inner (mm) | Weight (g) | Material | Size Class |
|---|---|---|---|---|---|
| WL3812-T | 380×320×120 mm | 365×280×110 mm | 1400 g | PP+Aluminum Frame | Sales Rep Kit |
| WL5020-T | 500×400×200 mm | 480×360×185 mm | 3100 g | PP+Aluminum Frame | Trade Show Case |
| WL8040-T | 800×500×400 mm | 770×470×370 mm | 8500 g | PP+Aluminum Frame | Mobile Conference Kit |
The most common model for "Medium cosmetic-case Manufacturer" buyers is the WL3812-T (380×320×120 mm OD, 1400 g empty weight, PP+Aluminum Frame body).
Four components define Medium cosmetic-case Manufacturer protection: shell (PP or PP+GF), foam (25 kg/m³ closed-cell PE), seal (silicone gasket around the lid), and pressure valve (automatic Gore-Tex membrane for IP67/IP68). Each component is tested. Each can be replaced if worn.
The shell is rated IP54 (splash-resistant, not submersible) ingress protection and validated to MIL-STD-810H Method 516.8 (26 drops at 1.2m). Temperature range is -40 ~ +80 °C. The automatic pressure-equalization valve keeps the seal intact during air transport and at altitude. Latch is a double-throw design rated for 5,000 open/close cycles. All units are 100% inspected for wall thickness uniformity, latch engagement, and foam adhesion before shipping.
Here are 3 real Medium cosmetic-case Manufacturer foam layouts from 2024-2026: (A) Sony A7 IV + 24-70mm + 70-200mm + 3 filters + 2 batteries — fits WL2808. (B) DJI Mavic 3 + RC + 4 batteries + charger — fits WL2005. (C) RED Komodo + 2 lenses + monitor + cables — fits WL5020. We share these at the 12h quote stage.
For Medium cosmetic-case Manufacturer, the decision comes down to: equipment dimensions (always measure with 5-10mm foam clearance), IP rating (IP65 indoor, IP67 outdoor, IP68 water), and certification (FCC for USA, CE for EU, MIL-STD for military). Beyond that, it is foam layout and quantity discount.
For alternatives: soft padded bags (¥50–200, $7–30) are cheaper but offer no real protection and last 6 months. Aluminum hard cases ($80–300) are heavier, prone to denting, and 2–4× the price. Carbon fiber cases ($300+) are overkill for 95% of B2B use cases. Our PP/PC engineering cases hit the sweet spot: 90% of the protection of aluminum at 30% of the weight and 50% of the cost, with 10-year typical service life.
After Medium cosmetic-case Manufacturer ships: (1) We send QC photos before shipment. (2) Lot certificate with serial numbers. (3) 90-day defect replacement. (4) Foam re-cut service for equipment changes. (5) 5-year case body warranty. (6) Tooling stored 3 years for easy reorder.
We do not use 'approximate' or 'typical' in our spec sheets. If a dimension is 250×210×70mm, that is what the QC gauge reads.
Established 2014. 13,000 sqm factory in Fusha Industrial Park, Zhongshan, Guangdong. 12 production lines, 60+ injection molding machines, 100+ employees, 20+ patents. Monthly capacity 80,000 units. Annual export revenue 8M+ USD to 47 countries.
Direct from the OEM. Unlike trading companies or sourcing agents who add 15–40% markup and disappear after delivery, KeXinMaterials handles everything in-house: mold development, injection molding, foam CNC cutting, QC testing, export documentation. Our 2024 buyer survey showed 87% repeat-order rate and 0.3% defect rate across 47 countries.
| Quantity | Unit Price | Discount | Lead Time | Sample |
|---|---|---|---|---|
| 50-99 pcs | USD 37.70 | — | 20 days | Free (pay shipping) |
| 100-199 pcs | USD 33.35 | 5% off | 25 days | Free (pay shipping) |
| 200-499 pcs | USD 29.00 | 10% off | 30 days | Free (pay shipping) |
| 500-999 pcs | USD 26.10 | 15% off | 30 days | Free (pay shipping) |
| 1000+ pcs | USD 23.20 | 20% off | 35-45 days | Free (pay shipping) |
Reference price for WL3812-T (380×320×120 mm). Custom sizes, colors, foam add 5–30%. Quote valid 30 days.
Medium cosmetic-case Manufacturer: WL Series Specs Comparison
Visual summary of the key specifications. Print-friendly for buyer reference.
📹 60-second factory + product walkthrough. Medium cosmetic-case Manufacturer dimension comparison, foam cutting precision, factory QC line
WL1905, WL2005, WL2305 are all 'Medium' size (~190-230mm outer length) but differ in width and depth. WL1905 is square (190×190), WL2005 is wider (195×170), WL2305 is balanced (230×180). 0.5-1.0mm differences determine what fits — we help you choose during the 12h quote consultation.
Yes. 60+ machines, 12 production lines, 150+ custom sizes since 2014. Custom molds: 30-day lead time, MOQ 500 units, $3,000-8,000 mold fee (waived for orders >5,000 units). Send your 3D model to kexin@beeaa.com for instant feasibility check.
Standard wall thickness is 3.0-3.5mm. The 3mm walls pass IP67, the 3.5mm walls pass IP68. Wall thickness is measured at 4 points on every production batch and recorded in the lot certificate.
We use a stainless steel pin hinge (3mm diameter for small, 5mm for large) rated for 10,000 open/close cycles. Hinge caps are molded into the case body, not screwed on. The hinge pin is removable for foam service.
Standard foam set is 25mm base + 10mm convoluted lid foam, CNC-cut to 0.5mm tolerance. Total foam thickness 35mm. Custom foam thickness available: 15-50mm base, with or without anti-static (ESD) treatment.
Free 5-day prototyping. ISO 9001 factory-direct. Ships to 47 countries.