Detailed specs for Long sample-display-case Manufacturer from KeXinMaterials source factory. Outer/inner dimensions in mm/inch, weight, material, foam options. Compare WL3812-T series. MOQ 30. 12h quote, 35-day delivery.
We have supplied Long sample-display-case Manufacturer to camera operators, drone pilots, broadcasters, and military contractors since 2014. This is the data sheet we send to all of them.
Below is the catalog data for Long sample-display-case Manufacturer. Each model has outer dimensions (in mm), inner cavity (mm), empty weight (g), and material specification. Material is engineering PP or PP+GF for impact resistance. Foam set is included: 25mm base + 10mm lid convoluted.
| Model | Outer (mm) | Inner (mm) | Weight (g) | Material | Size Class |
|---|---|---|---|---|---|
| WL3812-T | 380×320×120 mm | 365×280×110 mm | 1400 g | PP+Aluminum Frame | Sales Rep Kit |
| WL5020-T | 500×400×200 mm | 480×360×185 mm | 3100 g | PP+Aluminum Frame | Trade Show Case |
| WL6030-T | 600×450×300 mm | 575×420×280 mm | 4900 g | PP+Aluminum Frame | Exhibition Display |
The most common model for "Long sample-display-case Manufacturer" buyers is the WL3812-T (380×320×120 mm OD, 1400 g empty weight, PP+Aluminum Frame body).
Long sample-display-case Manufacturer shells are rated -40°C to +80°C per MIL-STD-810H Method 501.7 (high) and 502.7 (low). Chemically resistant to petroleum, mineral oil, dilute acids, alcohols, and most industrial solvents. Not resistant to concentrated sulfuric acid, aromatic, or chlorinated solvents.
The shell is rated IP54 (splash-resistant, not submersible) ingress protection and validated to MIL-STD-810H Method 516.8 (26 drops at 1.2m). Temperature range is -40 ~ +80 °C. The automatic pressure-equalization valve keeps the seal intact during air transport and at altitude. Latch is a double-throw design rated for 5,000 open/close cycles. All units are 100% inspected for wall thickness uniformity, latch engagement, and foam adhesion before shipping.
In 2024, we shipped Long sample-display-case Manufacturer for: (1) Film production — ARRI Alexa Mini + accessories in custom foam. (2) Drone operators — DJI Mavic 3 + RC + 6 batteries. (3) Broadcast — RED Komodo + 2 lenses + monitor. (4) Military — rifles + scopes + ammo. (5) Medical — first aid kits + AED.
Top 5 mistakes we see in 2024: (1) Over-specifying size — buying WL5020 when WL3812 fits. (2) Choosing by price alone. (3) Skipping IP certification. (4) Ignoring latch type. (5) Not requesting lot certificates. All five add up to a 2-3x higher TCO over 5 years.
For alternatives: soft padded bags (¥50–200, $7–30) are cheaper but offer no real protection and last 6 months. Aluminum hard cases ($80–300) are heavier, prone to denting, and 2–4× the price. Carbon fiber cases ($300+) are overkill for 95% of B2B use cases. Our PP/PC engineering cases hit the sweet spot: 90% of the protection of aluminum at 30% of the weight and 50% of the cost, with 10-year typical service life.
Ordering Long sample-display-case Manufacturer is 5 steps: inquiry (12h response), quote (with recommendation), PO + 30% deposit, production (35 days + QC photos), balance payment + shipment. Repeat orders are 15-20 days. Custom OEM/ODM adds 25-30 days for mold.
We test our cases at the QC station, not at the design office. Every dimension in this page has been measured on a real production batch.
Established 2014. 13,000 sqm factory in Fusha Industrial Park, Zhongshan, Guangdong. 12 production lines, 60+ injection molding machines, 100+ employees, 20+ patents. Monthly capacity 80,000 units. Annual export revenue 8M+ USD to 47 countries.
Direct from the OEM. Unlike trading companies or sourcing agents who add 15–40% markup and disappear after delivery, KeXinMaterials handles everything in-house: mold development, injection molding, foam CNC cutting, QC testing, export documentation. Our 2024 buyer survey showed 87% repeat-order rate and 0.3% defect rate across 47 countries.
| Quantity | Unit Price | Discount | Lead Time | Sample |
|---|---|---|---|---|
| 50-99 pcs | USD 37.70 | — | 20 days | Free (pay shipping) |
| 100-199 pcs | USD 33.35 | 5% off | 25 days | Free (pay shipping) |
| 200-499 pcs | USD 29.00 | 10% off | 30 days | Free (pay shipping) |
| 500-999 pcs | USD 26.10 | 15% off | 30 days | Free (pay shipping) |
| 1000+ pcs | USD 23.20 | 20% off | 35-45 days | Free (pay shipping) |
Reference price for WL3812-T (380×320×120 mm). Custom sizes, colors, foam add 5–30%. Quote valid 30 days.
Long sample-display-case Manufacturer: WL Series Specs Comparison
Visual summary of the key specifications. Print-friendly for buyer reference.
📹 60-second factory + product walkthrough. Long sample-display-case Manufacturer dimension comparison, foam cutting precision, factory QC line
Standard foam set is 25mm base + 10mm convoluted lid foam, CNC-cut to 0.5mm tolerance. Total foam thickness 35mm. Custom foam thickness available: 15-50mm base, with or without anti-static (ESD) treatment.
Standard: IP67 (submersible 1m / 30 min). Premium: IP68 (submersible 5m / 30 min) available for select models with reinforced seals and pressure valve. All IP tests performed by SGS, TUV, or Intertek at our lab in Zhongshan.
Engineering-grade polypropylene (PP) for standard, PP + glass fiber (PP+GF) for heavy-duty. We also offer ABS, PC+GF, and PA66+GF30 for specific applications. Material certification included with every shipment.
Standard: -40°C to +80°C. Validated by 12-cycle temperature chamber test per MIL-STD-810H Method 501.7 (high) and 502.7 (low). Some specialty materials extend to +120°C for industrial use.
±0.5mm on outer dimensions, ±0.3mm on inner dimensions. Verified at 4 points per unit. We publish tolerance in our spec sheets — many competitors do not.
Free 5-day prototyping. ISO 9001 factory-direct. Ships to 47 countries.