Detailed specs for Extra Large genetic-analyzer-case Manufacturer from KeXinMaterials source factory. Outer/inner dimensions in mm/inch, weight, material, foam options. Compare WL2305 series. MOQ 30. 12h quote, 35-day delivery.
We have supplied Extra Large genetic-analyzer-case Manufacturer to camera operators, drone pilots, broadcasters, and military contractors since 2014. This is the data sheet we send to all of them.
For your reference, here are the WL series models we typically use for Extra Large genetic-analyzer-case Manufacturer applications. Outer dimensions (OD) are measured to the outside of the case; inner dimensions (ID) reflect the usable cavity after subtracting wall thickness. All in millimeters; imperial dimensions in our catalog PDF.
| Model | Outer (mm) | Inner (mm) | Weight (g) | Material | Size Class |
|---|---|---|---|---|---|
| WL2305 | 230×180×45 mm | 225×150×40 mm | 240 g | PP+PC | First Aid Kit |
| WL3812 | 380×320×120 mm | 365×280×110 mm | 1100 g | PP+PC | Vaccine Carrier |
| WL5020-C | 500×400×200 mm | 480×360×185 mm | 2400 g | PP+PC+PCM | Cold Chain 24h (-20°C) |
The most common model for "Extra Large genetic-analyzer-case Manufacturer" buyers is the WL2305 (230×180×45 mm OD, 240 g empty weight, PP+PC body).
Extra Large genetic-analyzer-case Manufacturer shells are rated -40°C to +80°C per MIL-STD-810H Method 501.7 (high) and 502.7 (low). Chemically resistant to petroleum, mineral oil, dilute acids, alcohols, and most industrial solvents. Not resistant to concentrated sulfuric acid, aromatic, or chlorinated solvents.
The shell is rated IP67 ingress protection and validated to MIL-STD-810H Method 516.8 (26 drops at 1.5m). Temperature range is -80 ~ +50 (depending on PCM/VIP configuration) °C. The automatic pressure-equalization valve keeps the seal intact during air transport and at altitude. Latch is a double-throw design rated for 5,000 open/close cycles. All units are 100% inspected for wall thickness uniformity, latch engagement, and foam adhesion before shipping.
Common equipment we have designed Extra Large genetic-analyzer-case Manufacturer foam layouts for, based on real customer projects since 2014: DSLR + 2-3 lenses, mirrorless kits, cinema cameras with matte box + monitor, drones (DJI Mavic/Phantom/Inspire) with 5 batteries, broadcast lighting kits, military optics, medical devices.
For Extra Large genetic-analyzer-case Manufacturer, the decision comes down to: equipment dimensions (always measure with 5-10mm foam clearance), IP rating (IP65 indoor, IP67 outdoor, IP68 water), and certification (FCC for USA, CE for EU, MIL-STD for military). Beyond that, it is foam layout and quantity discount.
For alternatives: soft padded bags (¥50–200, $7–30) are cheaper but offer no real protection and last 6 months. Aluminum hard cases ($80–300) are heavier, prone to denting, and 2–4× the price. Carbon fiber cases ($300+) are overkill for 95% of B2B use cases. Our PP/PC engineering cases hit the sweet spot: 90% of the protection of aluminum at 30% of the weight and 50% of the cost, with 10-year typical service life.
Ordering Extra Large genetic-analyzer-case Manufacturer is 5 steps: inquiry (12h response), quote (with recommendation), PO + 30% deposit, production (35 days + QC photos), balance payment + shipment. Repeat orders are 15-20 days. Custom OEM/ODM adds 25-30 days for mold.
Most suppliers list dimensions in a single unit. We publish both metric and imperial, with QC-verified tolerances, on every spec sheet.
Established 2014. 13,000 sqm factory in Fusha Industrial Park, Zhongshan, Guangdong. 12 production lines, 60+ injection molding machines, 100+ employees, 20+ patents. Monthly capacity 80,000 units. Annual export revenue 8M+ USD to 47 countries.
Direct from the OEM. Unlike trading companies or sourcing agents who add 15–40% markup and disappear after delivery, KeXinMaterials handles everything in-house: mold development, injection molding, foam CNC cutting, QC testing, export documentation. Our 2024 buyer survey showed 87% repeat-order rate and 0.3% defect rate across 47 countries.
| Quantity | Unit Price | Discount | Lead Time | Sample |
|---|---|---|---|---|
| 50-99 pcs | USD 15.08 | — | 20 days | Free (pay shipping) |
| 100-199 pcs | USD 13.34 | 5% off | 25 days | Free (pay shipping) |
| 200-499 pcs | USD 11.60 | 10% off | 30 days | Free (pay shipping) |
| 500-999 pcs | USD 10.44 | 15% off | 30 days | Free (pay shipping) |
| 1000+ pcs | USD 9.28 | 20% off | 35-45 days | Free (pay shipping) |
Reference price for WL2305 (230×180×45 mm). Custom sizes, colors, foam add 5–30%. Quote valid 30 days.
Extra Large genetic-analyzer-case Manufacturer: WL Series Specs Comparison
Visual summary of the key specifications. Print-friendly for buyer reference.
📹 60-second factory + product walkthrough. Extra Large genetic-analyzer-case Manufacturer dimension comparison, foam cutting precision, factory QC line
Standard wall thickness is 3.0-3.5mm. The 3mm walls pass IP67, the 3.5mm walls pass IP68. Wall thickness is measured at 4 points on every production batch and recorded in the lot certificate.
We use a stainless steel pin hinge (3mm diameter for small, 5mm for large) rated for 10,000 open/close cycles. Hinge caps are molded into the case body, not screwed on. The hinge pin is removable for foam service.
Standard foam set is 25mm base + 10mm convoluted lid foam, CNC-cut to 0.5mm tolerance. Total foam thickness 35mm. Custom foam thickness available: 15-50mm base, with or without anti-static (ESD) treatment.
Standard: IP67 (submersible 1m / 30 min). Premium: IP68 (submersible 5m / 30 min) available for select models with reinforced seals and pressure valve. All IP tests performed by SGS, TUV, or Intertek at our lab in Zhongshan.
Engineering-grade polypropylene (PP) for standard, PP + glass fiber (PP+GF) for heavy-duty. We also offer ABS, PC+GF, and PA66+GF30 for specific applications. Material certification included with every shipment.
Free 5-day prototyping. ISO 9001 factory-direct. Ships to 47 countries.