dna-tester-case export process from KeXinMaterials source factory. OEM/ODM, wholesale, factory-direct pricing. 9 WL series sizes WL1204-WL5020, IP67/MIL-STD-810H certified, MOQ 30, 12h quote, 35-day delivery to 47 countries.
If you have been burned by a dna-tester-case export process supplier before — wrong dimensions, fake IP rating, lead time that doubled mid-order — this page is for you. It is the buyer's guide we wish someone had given us in 2014.
Below is the catalog data for dna-tester-case export process. Each model has outer dimensions (in mm), inner cavity (mm), empty weight (g), and material specification. Material is engineering PP or PP+GF for impact resistance. Foam set is included: 25mm base + 10mm lid convoluted.
| Model | Outer (mm) | Inner (mm) | Weight (g) | Material | Size Class |
|---|---|---|---|---|---|
| WL2305 | 230×180×45 mm | 225×150×40 mm | 240 g | PP+PC | First Aid Kit |
| WL3812 | 380×320×120 mm | 365×280×110 mm | 1100 g | PP+PC | Vaccine Carrier |
| WL6030-O | 600×450×300 mm | 575×420×280 mm | 4200 g | PP+PC+VIP | Organ Transport |
The most common model for "dna-tester-case export process" buyers is the WL2305 (230×180×45 mm OD, 240 g empty weight, PP+PC body).
dna-tester-case export process shells are rated -40°C to +80°C per MIL-STD-810H Method 501.7 (high) and 502.7 (low). Chemically resistant to petroleum, mineral oil, dilute acids, alcohols, and most industrial solvents. Not resistant to concentrated sulfuric acid, aromatic, or chlorinated solvents.
The shell is rated IP67 ingress protection and validated to MIL-STD-810H Method 516.8 (26 drops at 1.5m). Temperature range is -80 ~ +50 (depending on PCM/VIP configuration) °C. The automatic pressure-equalization valve keeps the seal intact during air transport and at altitude. Latch is a double-throw design rated for 5,000 open/close cycles. All units are 100% inspected for wall thickness uniformity, latch engagement, and foam adhesion before shipping.
Here are 3 real dna-tester-case export process foam layouts from 2024-2026: (A) Sony A7 IV + 24-70mm + 70-200mm + 3 filters + 2 batteries — fits WL2808. (B) DJI Mavic 3 + RC + 4 batteries + charger — fits WL2005. (C) RED Komodo + 2 lenses + monitor + cables — fits WL5020. We share these at the 12h quote stage.
Top 5 mistakes we see in 2024: (1) Over-specifying size — buying WL5020 when WL3812 fits. (2) Choosing by price alone. (3) Skipping IP certification. (4) Ignoring latch type. (5) Not requesting lot certificates. All five add up to a 2-3x higher TCO over 5 years.
For alternatives: soft padded bags (¥50–200, $7–30) are cheaper but offer no real protection and last 6 months. Aluminum hard cases ($80–300) are heavier, prone to denting, and 2–4× the price. Carbon fiber cases ($300+) are overkill for 95% of B2B use cases. Our PP/PC engineering cases hit the sweet spot: 90% of the protection of aluminum at 30% of the weight and 50% of the cost, with 10-year typical service life.
Standard dna-tester-case export process: MOQ 30 units, 35-day production, T/T 30/70. Custom: MOQ 500 units, 25-30 days mold + 35 days production. We support L/C for >$20,000 orders. Sample lead time 5-7 days, sample cost refundable on >2,000 unit order.
We have 150+ custom design cases since 2014. Whatever your question is, we have probably seen it before.
Established 2014. 13,000 sqm factory in Fusha Industrial Park, Zhongshan, Guangdong. 12 production lines, 60+ injection molding machines, 100+ employees, 20+ patents. Monthly capacity 80,000 units. Annual export revenue 8M+ USD to 47 countries.
Direct from the OEM. Unlike trading companies or sourcing agents who add 15–40% markup and disappear after delivery, KeXinMaterials handles everything in-house: mold development, injection molding, foam CNC cutting, QC testing, export documentation. Our 2024 buyer survey showed 87% repeat-order rate and 0.3% defect rate across 47 countries.
| Quantity | Unit Price | Discount | Lead Time | Sample |
|---|---|---|---|---|
| 50-99 pcs | USD 15.08 | — | 20 days | Free (pay shipping) |
| 100-199 pcs | USD 13.34 | 5% off | 25 days | Free (pay shipping) |
| 200-499 pcs | USD 11.60 | 10% off | 30 days | Free (pay shipping) |
| 500-999 pcs | USD 10.44 | 15% off | 30 days | Free (pay shipping) |
| 1000+ pcs | USD 9.28 | 20% off | 35-45 days | Free (pay shipping) |
Reference price for WL2305 (230×180×45 mm). Custom sizes, colors, foam add 5–30%. Quote valid 30 days.
dna-tester-case export process: Buyer Decision Tree
Visual summary of the key specifications. Print-friendly for buyer reference.
📹 60-second factory + product walkthrough. dna-tester-case export process buyer guide walkthrough, equipment fitting, quote process
OEM: you design, we manufacture. ODM: we design (based on your use case), you brand. OEM requires 3D model / spec sheet from you. ODM requires usage description only. OEM MOQ 500, ODM MOQ 200. Both lead time 25-30 days for tooling.
Yes. Free samples for standard WL series (you pay shipping, $30-80 via DHL). 5-day sample lead time. Custom samples: $200-500 fee (refundable on order >2,000 units), 7-15 day lead time.
No, you can supply your own foam. We can ship the case without foam (15% cost reduction) or with custom foam (your spec). Our standard foam is 25mm base + 10mm convoluted lid, CNC-cut to 0.5mm tolerance.
PP case body: 10+ year typical service life with normal use. Foam set: 5+ years before showing compression set. Latch: 5,000-10,000 open/close cycles. Hinge: 10,000 cycles. Replace foam when it no longer rebounds; replace case when latch or hinge fails.
We can re-cut foam for the same case. Cost: $20-50 per foam set depending on size. Lead time: 5-7 days. We keep your foam layout in our database for 3 years for easy re-order. If equipment changes significantly, you may need a different WL series.
Free 5-day prototyping. ISO 9001 factory-direct. Ships to 47 countries.