Detailed specs for Extra Large fusion-splicer-case Wholesale from KeXinMaterials source factory. Outer/inner dimensions in mm/inch, weight, material, foam options. Compare WL2305 series. MOQ 30. 12h quote, 30-day delivery.
Extra Large fusion-splicer-case Wholesale buyers usually start with two questions: what fits, and how much does it weigh empty. Then comes the third: is the case actually IP67, or is that printed on the box? We answer all three with data.
Below is the catalog data for Extra Large fusion-splicer-case Wholesale. Each model has outer dimensions (in mm), inner cavity (mm), empty weight (g), and material specification. Material is engineering PP or PP+GF for impact resistance. Foam set is included: 25mm base + 10mm lid convoluted.
| Model | Outer (mm) | Inner (mm) | Weight (g) | Material | Size Class |
|---|---|---|---|---|---|
| WL2305 | 230×180×45 mm | 225×150×40 mm | 240 g | PP | Multimeter / Caliper |
| WL2808 | 275×230×82 mm | 265×190×76 mm | 480 g | PP+AS | Surveying Total Station |
| WL6030 | 600×450×300 mm | 575×420×280 mm | 4200 g | PP+AS | Lab / Test Kit |
The most common model for "Extra Large fusion-splicer-case Wholesale" buyers is the WL2305 (230×180×45 mm OD, 240 g empty weight, PP body).
Extra Large fusion-splicer-case Wholesale shells are rated -40°C to +80°C per MIL-STD-810H Method 501.7 (high) and 502.7 (low). Chemically resistant to petroleum, mineral oil, dilute acids, alcohols, and most industrial solvents. Not resistant to concentrated sulfuric acid, aromatic, or chlorinated solvents.
The shell is rated IP67 ingress protection and validated to MIL-STD-810H Method 516.8 (26 drops at 1.2m). Temperature range is -40 ~ +80 °C. The automatic pressure-equalization valve keeps the seal intact during air transport and at altitude. Latch is a double-throw design rated for 5,000 open/close cycles. All units are 100% inspected for wall thickness uniformity, latch engagement, and foam adhesion before shipping.
Here are 3 real Extra Large fusion-splicer-case Wholesale foam layouts from 2024-2026: (A) Sony A7 IV + 24-70mm + 70-200mm + 3 filters + 2 batteries — fits WL2808. (B) DJI Mavic 3 + RC + 4 batteries + charger — fits WL2005. (C) RED Komodo + 2 lenses + monitor + cables — fits WL5020. We share these at the 12h quote stage.
Top 5 mistakes we see in 2024: (1) Over-specifying size — buying WL5020 when WL3812 fits. (2) Choosing by price alone. (3) Skipping IP certification. (4) Ignoring latch type. (5) Not requesting lot certificates. All five add up to a 2-3x higher TCO over 5 years.
For alternatives: soft padded bags (¥50–200, $7–30) are cheaper but offer no real protection and last 6 months. Aluminum hard cases ($80–300) are heavier, prone to denting, and 2–4× the price. Carbon fiber cases ($300+) are overkill for 95% of B2B use cases. Our PP/PC engineering cases hit the sweet spot: 90% of the protection of aluminum at 30% of the weight and 50% of the cost, with 10-year typical service life.
Ordering Extra Large fusion-splicer-case Wholesale is 5 steps: inquiry (12h response), quote (with recommendation), PO + 30% deposit, production (30 days + QC photos), balance payment + shipment. Repeat orders are 15-20 days. Custom OEM/ODM adds 25-30 days for mold.
Buyers who care about real specs (not marketing specs) end up working with us. We have shipped to 200+ spec-conscious buyers in 2024.
Established 2014. 13,000 sqm factory in Fusha Industrial Park, Zhongshan, Guangdong. 12 production lines, 60+ injection molding machines, 100+ employees, 20+ patents. Monthly capacity 80,000 units. Annual export revenue 8M+ USD to 47 countries.
Direct from the OEM. Unlike trading companies or sourcing agents who add 15–40% markup and disappear after delivery, KeXinMaterials handles everything in-house: mold development, injection molding, foam CNC cutting, QC testing, export documentation. Our 2024 buyer survey showed 87% repeat-order rate and 0.3% defect rate across 47 countries.
| Quantity | Unit Price | Discount | Lead Time | Sample |
|---|---|---|---|---|
| 50-99 pcs | USD 15.08 | — | 20 days | Free (pay shipping) |
| 100-199 pcs | USD 13.34 | 5% off | 25 days | Free (pay shipping) |
| 200-499 pcs | USD 11.60 | 10% off | 30 days | Free (pay shipping) |
| 500-999 pcs | USD 10.44 | 15% off | 30 days | Free (pay shipping) |
| 1000+ pcs | USD 9.28 | 20% off | 35-45 days | Free (pay shipping) |
Reference price for WL2305 (230×180×45 mm). Custom sizes, colors, foam add 5–30%. Quote valid 30 days.
Extra Large fusion-splicer-case Wholesale: WL Series Specs Comparison
Visual summary of the key specifications. Print-friendly for buyer reference.
📹 60-second factory + product walkthrough. Extra Large fusion-splicer-case Wholesale dimension comparison, foam cutting precision, factory QC line
Yes. 60+ machines, 12 production lines, 150+ custom sizes since 2014. Custom molds: 30-day lead time, MOQ 500 units, $3,000-8,000 mold fee (waived for orders >5,000 units). Send your 3D model to kexin@beeaa.com for instant feasibility check.
Standard wall thickness is 3.0-3.5mm. The 3mm walls pass IP67, the 3.5mm walls pass IP68. Wall thickness is measured at 4 points on every production batch and recorded in the lot certificate.
We use a stainless steel pin hinge (3mm diameter for small, 5mm for large) rated for 10,000 open/close cycles. Hinge caps are molded into the case body, not screwed on. The hinge pin is removable for foam service.
Standard foam set is 25mm base + 10mm convoluted lid foam, CNC-cut to 0.5mm tolerance. Total foam thickness 35mm. Custom foam thickness available: 15-50mm base, with or without anti-static (ESD) treatment.
Standard: IP67 (submersible 1m / 30 min). Premium: IP68 (submersible 5m / 30 min) available for select models with reinforced seals and pressure valve. All IP tests performed by SGS, TUV, or Intertek at our lab in Zhongshan.
Free 5-day prototyping. ISO 9001 factory-direct. Ships to 47 countries.