2026-09-21 · Équipe éditoriale KeXinMaterials

Guide de Conception d'Insert en Mousse Personnalisé pour Acheteurs B2B (2026)

L'intérieur en mousse représente 80 % de la valeur de protection. Ce guide compare les trois systèmes de mousse dominants — découpe CNC, pick-and-pluck et en couches — selon le matériau, la densité, le coût de fabrication et le flux B2B.

Pourquoi le choix de la mousse détermine la valeur de la caisse de protection

Two cases with identical shells and certifications can have radically different field performance depending on the foam interior. Foam absorbs 60-80% of impact energy transmitted to the contents.

Most B2B buyers focus on shell spec — IP rating, MIL-STD drop test, latch cycle. But the foam insert is what protects the actual contents. A well-designed foam cutout localises impact forces to non-critical areas of the equipment, prevents abrasion during transit, and organises gear for fast deployment.

For expensive equipment — thermal imaging cameras, surveying instruments, medical defibrillators, defence radios — the foam is mission-critical. A poor foam choice can destroy gear even when the shell survives.

Foam choice also drives 30-50% of total case cost and 7-15 days of lead time. B2B buyers should evaluate foam alongside shell spec, not as an afterthought.

Trois systèmes de mousse : découpe CNC vs pick-and-pluck vs en couches

Each foam system suits different B2B use cases. Match system to equipment value, deployment pattern, and order volume.

CNC-cut foam is the precision option. A factory cuts individual cavities to match exact equipment dimensions using a CNC knife or hot wire. Each cavity can be tuned for density, depth, and finger-pull access. Best when equipment value justifies the precision and content does not change frequently.

Pick-and-pluck foam is the field-flexible option. Pre-scored cubes can be plucked out by hand to fit gear. Buyer can reconfigure for new equipment without factory involvement. Best for mixed kits, service vans, photographers, and B2B programmes with frequent gear changes.

Layered foam (often convoluted "egg-crate" or flat stacked layers) is the lid-only option. Provides blanket cushioning on the inside of the case lid. Often combined with pick-and-pluck base. Best for general impact protection when exact equipment shape is not critical.

Matériau : Polyuréthane (PU) vs Polyéthylène (PE) vs EVA

Foam material drives cost, density, water resistance, and chemical compatibility. Three options dominate B2B case interiors.

Polyurethane (PU) foam is the soft, open-cell option. Density 30-50 kg/m³. Excellent shock absorption for fragile equipment (cameras, instruments, glass). Absorbs water — not suitable for marine / outdoor use without sealed bag. Custom colours available. Cost: medium.

Polyethylene (PE) foam is the firm, closed-cell option. Density 25-45 kg/m³. Waterproof, chemical-resistant, and reusable. The standard pick-and-pluck material. Custom CNC-cut possible but harder than PU. Cost: low-medium.

EVA foam (Ethylene-Vinyl Acetate) is the high-rebound option. Density 30-80 kg/m³. Used for premium camera and instrument interiors where tactile feel and rebound matter. Closed-cell, water-resistant. Cost: high.

At KeXinMaterials we stock PU (30-45 kg/m³) and PE (28-35 kg/m³) for CNC-cut work. EVA available on request for premium SKUs. Pick-and-pluck always PE (waterproof). Convoluted lid PU (compression-set recovery).

Sélection de la densité : adapter la mousse à l'équipement

Foam density determines how impact energy is absorbed. Three rules of thumb cover 90% of B2B procurement cases.

• Light equipment (under 2 kg, fragile optics): 30-35 kg/m³ PU. Soft cushion, slow rebound, absorbs micro-vibration.
• Medium equipment (2-10 kg, mixed use): 35-45 kg/m³ PU or PE. Standard protection for cameras, surveying gear, instruments.
• Heavy equipment (10+ kg, defence / industrial): 45-60 kg/m³ PU or PE. High-density load-bearing foam for radios, weapons, medical carts.
• Anti-static requirement (electronics): PU or PE with anti-static additive. Surface resistivity 10⁹-10¹¹ Ω. Verified per SKU.
• ESD-sensitive (PCB, SSD): Conductive PU, surface resistivity 10³-10⁶ Ω. Specify in RFP.

Flux de conception de mousse CNC : 7 jours du dessin à la production

A precision CNC foam project takes 7-14 days end-to-end. The buyer's role: provide accurate equipment drawings.

• Day 1-2: Equipment geometry. Buyer sends equipment 3D drawing (STEP / IGES) or 2D drawing with key dimensions. For organic shapes, physical sample shipped to factory.
• Day 3-4: Foam cavity design. Factory designer drafts cavity layout in CAD: 1-2mm clearance around each item, finger grips for retrieval, labelling panel.
• Day 5-7: Sample production. 1-3 sample foam inserts produced via CNC hot wire or knife. Shipped via DHL to buyer for evaluation.
• Day 8-10: Sample evaluation. Buyer fits equipment, marks required adjustments. Factory revises and re-cuts if needed.
• Day 11-14: Mass production. 100+ foam inserts produced per approved design. In-line QC: cavity depth, dimension tolerance, finger grip accessibility.
• Day 15+: Foam install + lid foam. Foam inserts installed into case shells. Convoluted or flat PU added to lid for top-down impact protection.
• Day 21-30: Shipment. Foam installed, case closed, packed, shipped FOB Shenzhen / FOB Ningbo.

Erreurs courantes de conception de mousse

Five recurring foam design errors cost B2B buyers 10-25% of protective case effectiveness. Avoid them upfront.

• Mistake 1: Cavities too tight. Equipment does not fit on assembly day, or fits but cannot be retrieved. Spec 1-2mm clearance on each side.
• Mistake 2: No finger grips. Foam must allow easy retrieval in field. Designer adds 5-10mm finger slot or thumb cutout to each cavity.
• Mistake 3: Wrong density. Soft foam + heavy equipment = equipment bottoms out under load. Heavy equipment needs higher density.
• Mistake 4: Lid foam forgotten. Top-down impact protection requires lid foam (convoluted PU, 15-25mm thick). Skipping it defeats MIL-STD-810G top drop test.
• Mistake 5: Foam absorbs water. PU is open-cell; absorbs water in marine / outdoor use. Use PE for marine, or seal PU in waterproof liner.

Pourquoi choisir KeXinMaterials pour les caisses en mousse personnalisées

We have produced over 5,000 custom foam inserts since 2014. 30+ designers fluent in SolidWorks, AutoCAD, and Fusion 360. CNC hot-wire cutting on 4 production lines.

Standard material stock: PU 30-45 kg/m³, PE 28-35 kg/m³, EVA 35-55 kg/m³. Anti-static PU available. Conductive PU on request for ESD-sensitive electronics.

Anti-static additive available for electronics. Conductive PU (10³-10⁶ Ω surface) for ESD-sensitive PCBs / SSDs.

Sample lead time 7-10 days. Mass production 10-14 days after sample approval. Integrated with case shell production for 30-45 day end-to-end OEM delivery.

We export foam-buffed cases to USA, UK, Germany, Canada, Japan, Russia, Philippines, India, HK/TW, Middle East. Trade terms: EXW Shenzhen / FOB Shenzhen / FOB Ningbo.

FAQ

Articles connexes

• Peli Case Alternative Factory Direct
• China Protective Case Factory Direct Export Guide
• Protective Case Foam Interior Options
• China Protective Case Factory Deep Dive
• Ip67 Vs Ip68 Vs Mil Spec