2026-09-21 · Équipe éditoriale KeXinMaterials
Personnalisation de Caisse : Logo / Couleur / Mousse / Matériel Guide B2B 2026
La personnalisation B2B des caisses comprend l'impression de logo, la personnalisation de couleur, la mousse intérieure personnalisée, le matériel personnalisé et le développement de moule OEM.
Aperçu de la personnalisation
B2B case customization has 5 dimensions: logo printing, color customization, custom foam, custom hardware, and OEM mold. Each with different cost + MOQ + lead time.
Logo printing: lowest cost customization. USD 0.50-5 per case over setup. MOQ 2,000 cases. Lead time 1-2 weeks.
Color customization: medium cost. USD 1-5 per case over stock color. MOQ 5,000-20,000 cases (full color batch). Lead time 2-4 weeks.
Custom foam: medium cost. USD 5-50 per case over standard foam. MOQ 50-500 cases. Lead time 2-4 weeks (custom design + sampling).
Custom hardware: medium-high cost. USD 5-20 per case over stock hardware. MOQ 100-500 cases. Lead time 4-8 weeks.
OEM mold: highest cost. USD 5,000-50,000 one-time tooling. MOQ 1,000-10,000 cases. Lead time 30-90 days.
B2B buyer strategy: prioritize low-cost customization first (logo + color + standard foam), upgrade to custom foam + hardware for premium SKUs, use OEM mold only for high-volume or strategic products.
Méthodes d'impression de logo
Logo printing on case exterior has 4 main methods: silkscreen printing, pad printing, laser engraving, and in-mold labeling. Each with different cost + durability + MOQ.
Silkscreen printing: most common. 1-4 colors. USD 0.50-3 per case. Durable 2-3 years outdoor. MOQ 500 cases. Lead time 1-2 weeks.
Pad printing: 1-2 colors. USD 0.50-2 per case. Less durable than silkscreen (1-2 years). MOQ 200 cases. Lead time 1-2 weeks.
Laser engraving: no color, etched surface. USD 0.30-1 per case. Permanent (cannot fade). MOQ 100 cases. Lead time 1 week.
In-mold labeling (IML): embedded label during injection molding. USD 1-5 per case. Most durable (5-10 years). MOQ 5,000-20,000 cases (full batch). Lead time 4-8 weeks (mold label preparation + mold trial).
B2B recommendation: silkscreen for general use, laser engraving for low-MOQ or premium, IML for high-volume or longest life.
Personnalisation de couleur
Color customization is done by adding pigment / masterbatch to base PP / ABS / PC resin. Color match is critical for brand consistency.
Stock color: black, gray, olive, yellow, orange, red, blue. No additional setup. MOQ 1 case.
Standard color: white, silver, custom primary colors. USD 1-3 per case over stock. MOQ 500-2,000 cases (color batch).
Custom color: Pantone match or sample match. USD 3-10 per case over stock. MOQ 5,000-20,000 cases (full color batch).
Color masterbatch: 1-3% added to base resin. Mixed color industry standard.
Color fastness: UV-A to UV stabilization required for non-black colors. Black color most UV stable (carbon black).
Lead time: 2-4 weeks for new color masterbatch + mold trial. Stock color no lead time.
Intérieur en mousse personnalisé
Custom foam interior provides precision fit + professional presentation. CNC routed PU foam or die-cut EVA foam. Selection depends on volume + complexity.
Pick-and-pluck PE foam: cheapest. Buyer plucks cubes manually. MOQ 10 cases. Lead time 0-1 day.
CNC routed PU foam: precision. CAD → G-code → hotwire / mill. MOQ 50-500 cases. Lead time 2-4 weeks.
Die-cut EVA foam: medium precision. Die + press. MOQ 100-2,000 cases. Lead time 2-4 weeks.
3D heat-formed EVA foam: high precision for repeated shapes. MOQ 500-5,000 cases. Lead time 4-8 weeks.
Custom design cost: USD 300-2,000 per SKU one-time design. Free if buyer provides 3D CAD model.
B2B recommendation: pick-and-pluck for prototyping. CNC PU foam for premium / high-volume.
Personnalisation du matériel (charnière / loquet / poignée)
Custom hardware changes mold dimensions + tooling. Higher cost than standard hardware but enables unique product positioning.
Custom hinge: USD 3-5 per case over standard. Mold change cost USD 5,000-15,000. MOQ 5,000-20,000 cases.
Custom latch: USD 2-4 per case over standard. Mold change cost USD 3,000-10,000. MOQ 5,000-20,000 cases.
Custom handle: USD 2-3 per case over standard. Mold change cost USD 3,000-8,000. MOQ 10,000-20,000 cases.
Custom wheel: USD 2-5 per case over standard. Mold change cost USD 5,000-15,000. MOQ 5,000-20,000 cases.
Mold change lead time: 30-60 days. Sample 1-2 weeks after mold.
B2B recommendation: standard hardware for most cases. Custom hardware only for strategic products.
Développement de moule OEM
OEM mold development enables full custom case (size, shape, color, hardware). Highest cost customization but enables unique product.
Mold cost: USD 5,000-50,000 per mold. Single cavity (1 case per cycle) USD 5,000-15,000. Multi-cavity (4-8 cases per cycle) USD 15,000-50,000.
Mold material: P20 steel for short runs (50,000-200,000 cycles). H13 steel for long runs (1,000,000+ cycles). S7 steel for high-volume (5,000,000+ cycles).
Mold lead time: 30-90 days. Sample lead time: 1-2 weeks. Mass production lead time: 30-60 days.
Mold ownership: buyer (most common), factory (alternative for cost sharing), or shared (cost sharing for lower MOQ).
Mold lifetime: 100,000-500,000 shots for P20, 1M+ for H13, 5M+ for S7.
B2B recommendation: OEM mold only for high-volume (5,000+ cases/year) or strategic products. Shared mold for medium volume (1,000-5,000 cases/year).
Stratégie de personnalisation B2B
Different B2B applications require different customization strategies. Below is the 2026 recommendation.
Camera / broadcast brand (Pelican / SKB / Gator equivalent): premium customization. Logo + color + custom foam + OEM mold. B2B buyer specs premium customization.
Drone brand: medium customization. Logo + standard color + custom foam + OEM mold. B2B buyer specs medium customization.
Military / tactical brand: standard customization. Logo + standard hardware + custom foam. OEM mold rarely (standard cases fit).
Medical brand: high customization. Custom foam + medical-grade material + OEM mold. B2B buyer specs high customization for clinical workflow.
Industrial brand: low customization. Logo + standard color + standard foam + standard hardware. B2B buyer specs low customization for cost-effectiveness.
Résumé coût + délai + MOQ
Case customization cost + lead time summary. Approximate 2026 data.
Logo silkscreen: USD 0.50-3 / case. MOQ 500. Lead time 1-2 weeks.
Logo laser engraving: USD 0.30-1 / case. MOQ 100. Lead time 1 week.
Logo in-mold label: USD 1-5 / case. MOQ 5,000-20,000. Lead time 4-8 weeks.
Color standard: USD 0 / case. MOQ 100. Lead time 0.
Color custom: USD 1-10 / case. MOQ 500-20,000. Lead time 2-4 weeks.
Foam pick-and-pluck: USD 1-5 / case. MOQ 10. Lead time 0-1 day.
Foam CNC PU: USD 20-100 / case. MOQ 50-500. Lead time 2-4 weeks.
Foam EVA die-cut: USD 10-30 / case. MOQ 100-2,000. Lead time 2-4 weeks.
Hardware standard: USD 0 / case. MOQ 100. Lead time 0.
Hardware custom: USD 2-5 / case + mold USD 5,000-15,000. MOQ 5,000-20,000. Lead time 30-60 days.
OEM mold: USD 5,000-50,000 / mold. MOQ 1,000-10,000. Lead time 30-90 days.
Points clés
- Sérigraphie logo : USD 0,50-3 / caisse, MOQ 500, 1-2 semaines (entrée de gamme)
- Couleur personnalisée : USD 1-10 / caisse, MOQ 500-20.000, 2-4 semaines
- Mousse CNC PU personnalisée : USD 20-100 / caisse, MOQ 50-500, 2-4 semaines
- Matériel personnalisé : USD 2-5 + moule USD 5.000-15.000, MOQ 5.000-20.000, 30-60 jours
- Moule OEM : USD 5.000-50.000, MOQ 1.000-10.000, 30-90 jours (stratégique uniquement)
FAQ
Quel est le moyen le moins cher de personnaliser une caisse ?
L'impression de logo (sérigraphie ou gravure laser) est la personnalisation la moins chère.
Quel est le MOQ minimum pour couleur personnalisée ?
MOQ couleur personnalisée typiquement 500-20.000 caisses.
Le développement de moule OEM vaut-il le coup ?
Le développement de moule OEM ne vaut le coup que pour les volumes élevés.
Qu'est-ce que l'étiquetage in-mold (IML) ?
IML est un processus de fabrication où une étiquette pré-imprimée est intégrée dans la coque.
Quelle est la méthode d'impression de logo la plus durable ?
IML est la plus durable (5-10 ans en extérieur).
Combien de temps prend le développement de moule OEM ?
Le développement de moule OEM prend 30-90 jours pour le moule lui-même.
Puis-je personnaliser une caisse en stock ?
Oui. Les caisses en stock supportent impression logo, couleur standard, mousse, matériel.