2026-09-21 · KeXinMaterials Redaktionsteam

Erste-Hilfe-Koffer B2B-Notfallbeschaffungsleitfaden (2026): OSHA, DIN 13164, ANSI Z308.1

Erste-Hilfe-Koffer bedienen OSHA-regulierte Arbeitsplätze, DIN 13164-konforme Fahrzeuge, ANSI Z308.1 Industrie-Standorte und Remote-Feldoperationen. Hier ist der 2026 B2B-Beschaffungsleitfaden für konforme Erste-Hilfe-Sets.

Warum Erste-Hilfe-Koffer compliance-getrieben sind

First aid kits are not generic storage — they are regulatory compliance items. OSHA, DIN, ANSI standards dictate minimum content.

OSHA 29 CFR 1910.151 (US): workplace must have "adequate first aid supplies" readily accessible. ANSI Z308.1-2021 specifies minimum fill requirements for Class A (basic) and Class B (broader) first aid kits.

DIN 13164 (Germany / EU): standard motor vehicle first aid kit. Required in all registered motor vehicles. Includes specific bandages, dressings, and rescue blanket.

BS 8599-1 (UK): workplace first aid kit. Critical injury kit. Travel and motoring kit. Specific fill requirements by workplace risk level.

For B2B buyers (workplaces, fleet operators, field service, emergency services), the case must meet regional standard. Case design is secondary to content compliance.

OSHA + ANSI Z308.1 US-Standard

OSHA 1910.151 references ANSI Z308.1 for kit fill requirements. ANSI Z308.1-2021 defines Class A (basic) and Class B (broader) kits.

ANSI Z308.1-2021 Class A (basic workplace kit): adhesive bandages (16), gauze pads (4), gauze rolls (1), trauma pads (2), antiseptic wipes (6), burn dressings (1), triangular bandages (1), cold packs (1), eye wash (1 oz), nitrile gloves (2 pairs), scissors (1), tweezers (1), first aid guide (1).

ANSI Z308.1-2021 Class B (broader / industrial): all Class A items in higher quantities + additional trauma hand (2), splints (2), tourniquets (1), additional nitrile gloves (4 pairs), additional gauze rolls (2).

OSHA enforcement: inspectors verify minimum fill on first aid kits in workplaces. Non-compliance = fines up to USD 15,000+ per violation. Kits must be checked monthly and restocked.

For B2B buyers sourcing US-compliant kits: request ANSI Z308.1 fill certificate per lot, not just case + content photo. Verify expiry dates on sterile components.

DIN 13164 EU-Standard

DIN 13164 is the German / EU standard for motor vehicle first aid kits. Mandatory in all registered vehicles.

DIN 13164 contents: 1m x 60mm conforming bandage, 4 wound dressings, 2 dressing pads, 4 triangular bandages, 5 adhesive strips 10x6cm, 2 fingertip dressings, 2 finger dressings, 4 plaster strips, 1 rescue blanket 160x210cm silver/gold, 2 disposable gloves, 1 first aid scissors (DIN 58279-A), 1 instruction leaflet.

DIN 13164 case: typically 26x17x8 cm hard case or soft pouch. Multiple variants: DIN 13164 (motor vehicle), DIN 13157 (workplace small), DIN 13169 (workplace large), DIN 13160 (children).

For B2B buyers in EU: DIN 13164 kit is mandatory for fleet vehicles. OSHA equivalent (workplace) requires larger DIN 13157 or DIN 13169.

Sourcing: most EU auto manufacturers ship vehicle with DIN 13164. Aftermarket B2B (fleet, rental) requires stock replacement annually or after use.

BS 8599-1 UK-Standard

BS 8599-1 is the British standard for workplace first aid kits. Differs from DIN 13164 in fill and travel hours.

BS 8599-1 workplace kits: small (1-5 employees), medium (5-25), large (25-50). Each specifies minimum fill for the risk profile.

BS 8599-1 critical injury pack: trauma dressings, haemostatic gauze, tourniquet, gloves. Designed for catastrophic bleeding control pending ambulance arrival.

BS 8599-1 travel and motoring kit: compact for vehicle. Required for company car / fleet operators.

For B2B UK buyers: BS 8599-1 compliance required. EU buyers importing to UK post-Brexit: dual DIN 13164 + BS 8599-1 coverage recommended for fleet.

Feld / Wildnis Erste Hilfe (Remote-Operationen)

Remote field operations — expedition, geological survey, forestry, maritime — need extended first aid kits beyond workplace standards.

Field first aid kit minimum (multi-day remote): trauma pack, hemostatic gauze, Israeli bandage, tourniquet, emergency blanket, SAM splint, hydration salts, antihistamine, analgesic, antibiotic, blister care, snake bite kit, burn gel, water purification.

Case design: IP65 / IP67 minimum for outdoor. Foam-cut compartments for organised retrieval. Lightweight for hiking carry.

B2B buyers: expedition companies, geological survey firms, forestry contractors, maritime operators. Often require 30-day remote capability.

Special certifications for remote field kits: Wilderness Medical Society guidelines, Remote EMT certification. Not formal but procurement standard.

Fahrzeug- und Luftfahrt-Erste-Hilfe

Vehicle and aviation first aid kits have specific regulatory requirements beyond workplace standards.

Vehicle first aid (commercial fleet): OSHA 1910.151 if US workplace vehicles; DIN 13164 if EU; BS 8599-1 if UK. 1-3 kits per vehicle depending on size.

Aviation first aid (commercial airlines / charter): FAA 14 CFR 121.333 for US airlines. EASA Part-OPS for EU. Specific drug / equipment list. EMK (Emergency Medical Kit) and FAK (First Aid Kit) are different categories.

Aviation EMK: prescription drugs, defibrillator, advanced airway equipment. Restricted to qualified medical professionals or trained crew.

Aviation FAK: bandages, dressings, basic medications. Available to crew and passengers.

For B2B aviation procurement: separate EMK and FAK. EMK requires medical professional oversight for inventory management.

MOQ, Lieferzeit, Preisgestaltung

First aid kits fall into three tiers. Match tier to programme size.

Tier 1 stock first aid kit (OSHA / DIN / BS 8599-1 compliant): MOQ 100-500 cases, USD 25-80/unit, 15-25 days production. Standard fill + customisable outer case.

Tier 2 custom OEM first aid kit: MOQ 500-2,000 cases, USD 35-100/unit (custom branding + custom fill), 30-45 days production. Brand logo + custom fill per regional standard.

Tier 3 new mould first aid case (custom outer case + fill): MOQ 5,000+ cases amortised, USD 30-90/unit post-amortisation, 60-90 days mould + 30-45 days production. For brand-owned first aid programmes.

Warum KeXinMaterials für Erste-Hilfe-Koffer wählen

KeXinMaterials operates 60+ injection machines in a 13,000 m² facility since 2014. Hard-shell first aid cases for OSHA, DIN, BS 8599-1, ANSI compliance.

Stock first aid cases: 4 sizes from compact (26x17x8 cm DIN-style) to large (40x30x12 cm workplace). Custom fills available per regional standard.

Material: PP copolymer (workhorse, FDA-compatible), impact-resistant. Wall-mounted brackets available.

Certifications: ISO 9001:2015. FDA-compatible materials (FDA 21 CFR 177.1520). Fills supplied to OSHA / DIN / BS 8599-1 standards.

Trade terms: EXW Shenzhen / FOB Shenzhen / FOB Ningbo. No DDP, no EU warehouse, no US warehouse. Every shipment direct from our 13,000 m² Guangdong facility.

FAQ

Verwandte Artikel

• Medical Case Fda Ce Compliance B2B
• China Protective Case Factory Direct Export Guide
• Oem Vs Odm Protective Case Manufacturing Decision
• Moq Lead Times Protective Case B2B Detailed Guide
• Peli Case Alternative Factory Direct