Detailed specs for Small camera-case Manufacturer from KeXinMaterials source factory. Outer/inner dimensions in mm/inch, weight, material, foam options. Compare WL1204 series. MOQ 100. 12h quote, 30-day delivery.
If you are sourcing Small camera-case Manufacturer from a Chinese factory, you have probably seen marketing sheets with vague dimensions and a single IP rating. We do the opposite. Every dimension here is measured at the QC station, every rating is third-party tested.
Below is the catalog data for Small camera-case Manufacturer. Each model has outer dimensions (in mm), inner cavity (mm), empty weight (g), and material specification. Material is engineering PP or PP+GF for impact resistance. Foam set is included: 25mm base + 10mm lid convoluted.
| Model | Outer (mm) | Inner (mm) | Weight (g) | Material | Size Class |
|---|---|---|---|---|---|
| WL1204 | 120×90×40 mm | 115×78×32 mm | 100 g | PP | Small |
| WL2808 | 275×230×82 mm | 265×190×76 mm | 480 g | PP | Large |
The most common model for "Small camera-case Manufacturer" buyers is the WL1204 (120×90×40 mm OD, 100 g empty weight, PP body).
Small camera-case Manufacturer shells are rated -40°C to +80°C per MIL-STD-810H Method 501.7 (high) and 502.7 (low). Chemically resistant to petroleum, mineral oil, dilute acids, alcohols, and most industrial solvents. Not resistant to concentrated sulfuric acid, aromatic, or chlorinated solvents.
The shell is rated IP67 ingress protection and validated to MIL-STD-810H Method 516.8 (26 drops at 1.2m). Temperature range is -40 ~ +80 °C. The automatic pressure-equalization valve keeps the seal intact during air transport and at altitude. Latch is a double-throw design rated for 5,000 open/close cycles. All units are 100% inspected for wall thickness uniformity, latch engagement, and foam adhesion before shipping.
Common equipment we have designed Small camera-case Manufacturer foam layouts for, based on real customer projects since 2014: DSLR + 2-3 lenses, mirrorless kits, cinema cameras with matte box + monitor, drones (DJI Mavic/Phantom/Inspire) with 5 batteries, broadcast lighting kits, military optics, medical devices.
For Small camera-case Manufacturer, the decision comes down to: equipment dimensions (always measure with 5-10mm foam clearance), IP rating (IP65 indoor, IP67 outdoor, IP68 water), and certification (FCC for USA, CE for EU, MIL-STD for military). Beyond that, it is foam layout and quantity discount.
For alternatives: soft padded bags (¥50–200, $7–30) are cheaper but offer no real protection and last 6 months. Aluminum hard cases ($80–300) are heavier, prone to denting, and 2–4× the price. Carbon fiber cases ($300+) are overkill for 95% of B2B use cases. Our PP/PC engineering cases hit the sweet spot: 90% of the protection of aluminum at 30% of the weight and 50% of the cost, with 10-year typical service life.
Ordering Small camera-case Manufacturer is 5 steps: inquiry (12h response), quote (with recommendation), PO + 30% deposit, production (30 days + QC photos), balance payment + shipment. Repeat orders are 15-20 days. Custom OEM/ODM adds 25-30 days for mold.
We do not use 'approximate' or 'typical' in our spec sheets. If a dimension is 250×210×70mm, that is what the QC gauge reads.
Established 2014. 13,000 sqm factory in Fusha Industrial Park, Shenzhen, Guangdong. 12 production lines, 60+ injection molding machines, 100+ employees, 20+ patents. Monthly capacity 80,000 units. Annual export revenue 8M+ USD to 47 countries.
Direct from the OEM. Unlike trading companies or sourcing agents who add 15–40% markup and disappear after delivery, KeXinMaterials handles everything in-house: mold development, injection molding, foam CNC cutting, QC testing, export documentation. Our 2024 buyer survey showed 87% repeat-order rate and 0.3% defect rate across 47 countries.
Validated in our lab, not marketing claims.
| Quantity | Unit Price | Discount | Lead Time | Sample |
|---|---|---|---|---|
| 50-99 pcs | USD 12.35 | — | 20 days | Free (pay shipping) |
| 100-199 pcs | USD 10.92 | 5% off | 25 days | Free (pay shipping) |
| 200-499 pcs | USD 9.50 | 10% off | 30 days | Free (pay shipping) |
| 500-999 pcs | USD 8.55 | 15% off | 30 days | Free (pay shipping) |
| 1000+ pcs | USD 7.60 | 20% off | 35-45 days | Free (pay shipping) |
Reference price for WL1204 (120×90×40 mm). Custom sizes, colors, foam add 5–30%. Quote valid 30 days.
Small camera-case Manufacturer: WL Series Specs Comparison
Visual summary of the key specifications. Print-friendly for buyer reference.
📹 60-second factory + product walkthrough. Small camera-case Manufacturer dimension comparison, foam cutting precision, factory QC line
Engineering-grade polypropylene (PP) for standard, PP + glass fiber (PP+GF) for heavy-duty. We also offer ABS, PC+GF, and PA66+GF30 for specific applications. Material certification included with every shipment.
Standard: -40°C to +80°C. Validated by 12-cycle temperature chamber test per MIL-STD-810H Method 501.7 (high) and 502.7 (low). Some specialty materials extend to +120°C for industrial use.
±0.5mm on outer dimensions, ±0.3mm on inner dimensions. Verified at 4 points per unit. We publish tolerance in our spec sheets — many competitors do not.
Yes, automatic Gore-Tex membrane valve on all IP67/IP68 models. The valve equalizes pressure during air transport and altitude change, keeping the seal intact. Valve rated for 1,000+ cycles.
Standard: glass-filled nylon (PA66+GF30), 5,000-cycle rated. Premium: stainless steel reinforced, 10,000-cycle rated. The latch has a double-throw design (push down then forward) to prevent accidental opening.
Free 5-day prototyping. ISO 9001 factory-direct. Ships to 47 countries.